Dish Former/Box

Use this pancake die to cut two strips of metal (connected by a short tab that is easily removed with saw or shear). These strips, when soldered and formed round, create a pair of telescoping rings. Use the two rings as a lid and container for a poison ring, small container pendant, or just a teeny tiny box. Design: 2" x 1" Die: 6-1/2" x 3-3/8" Longer strip measures: 51mm long x 6mm wide and creates a 17mm (OD) diameter ring. Shorter strip measures: 44mm x 6mm wide and creates a 15mm (OD) diameter ring.. THIS SET IS INTENDED FOR USE WITH 20 GAUGE FULLY HARD Sheet if you want to make a fitted lid and container. If you use a different gauge the parts will not fit as well together. If your metal is not full hard it may become stuck in the die. If you would like to purchase a circle pancake die that fits well with these two rings, the 3/4” diameter and 5/8" diameter circles work well. If you would like to purchase a matching ring blank die, there are many that would work, but PD R16o works perfectly.

Design: 3.5" x 3.5" Die itself: 8-1/8" x 5-1/2" Coordinated to work with the Pointed Quatrefoil Dish Former Silhouette Die (DF-040). ***Will not fit in the discontinued Potter USA medium press***

This kit includes 5 pancake dies which work together to form a 1" round lidded container. Use this pancake die set with 18-gauge sheet metal to create 1" round boxes with fitted lids! The kit includes pancake dies for two types of lids - over-fitted lids (lids that fit over the container), and inside-fitted lids (lids that have an inner rim that fits down into the container). These small containers are perfect for ring boxes, little gifts, small treasures, pill boxes, or whatever you can think of! We’ve done all the math for you so you don’t have to figure out how to make all the parts fit together yourself - just cut, solder, form, and assemble! **The die measurements have all been done for 18 gauge metal and a snug fitted lid. You can use other gauges (16-22) but it will change the fit of the lid and container. This set includes the following: PD1913: Container body measures 83mm x 20mm, overall die measures 5-3/8" x 5-5/16" PD1914: Over-Fitted Lid measures 91mm x 10mm, overall die measures 5-7/16" x 4-15/16" PD1915: Inside-Fitted Lid Outer Band measures 83mm x 10mm, overall die measures 5-7/16" x 4-15/16" PD1916: Inside-Fitted Lid Inner Band measures 77mm x 10mm, overall die measures 5-7/16" x 4-15/16" PD1917: Lid top and container bottom measures 28mm diameter, overall die measures 3-3/8" x 5-5/8"

Design: 4" x 2-1/2" Die itself: 7" x 5-7/8" Coordinated to work with the Arabesque 8 Dish Former Silhouette Die (DF-038). ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2" x 2-1/2" Die itself: 7" x 5-1/2" Coordinated to work with the 3" Crescent Moon Dish Former Silhouette Die (DF-038). ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2" x 2-11/16" Die itself: 7" x 4-1/2" Coordinated to work with the 3" Spoon Shape B Dish Former Silhouette Die (DF-033). ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2" x 2-3/8" Die itself: 7" x 4-3/8" Coordinated to work with the 3" Spoon Shape B Dish Former Silhouette Die (DF-034). ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2"from side to side, 2-3/4" tall Die itself: 7-1/4" x 5-1/2" Coordinated to work with the 3" Bird Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2"from side to side, 2" tall Die itself: 6-1/2" x 5-1/2" Coordinated to work with the 3" Rainbow Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2"from top to bottom, 2-1/2" wide Die itself: 7-15/16"" x 4-3/4" Coordinated to work with the 3" Fish Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press*** *Sample by Lynette Andreasen

Design: 3" x 3" Die itself: 7" x 5-1/4" Coordinated to work with the Pie Slice Dish former die DF-025 ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2" x 3-7/16". Die itself: 7-7/8" x 5-7/16". Coordinated to work with SD-DF024. ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2" x 3". Die itself: 7-1/2" x 5-9/16". Coordinated to work with SD-DF023. ***Will not fit in the discontinued Potter USA medium press***

3-3/16" wide x 3-1/2". Overall die size measurements 7-3/4" x 5-3/16". Coordinated to work with DF018 Dish Former Silhouette Die Hamsa. Will not fit in the discontinued medium PotterUSA press.

3-1/16" wide (from the center of each side), 3-1/2" wide from point to point. Overall die size measurements 7-1/2" x 5-1/2". Coordinated to work with DF015 Dish Former Silhouette Die Hexagon. Will not fit in the discontinued medium PotterUSA press.

3-1/2" x 2-5/8". Overall die size measurements 7" x 5-1/2". Coordinated to work with DF017 Dish Former Silhouette Die Pumpkin. Will not fit in the discontinued medium PotterUSA press.

Design: 3-1/2"from center to center of each edge Die itself: 7-3/4" x 5-1/2 Coordinated to work with the 3" Sakura Blossom Silhouette Die. SKU: SD-DF-021 ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2"from center to center of each edge Die itself: 7-3/4" x 5-1/2 Coordinated to work with BOTH the 3" Sakura Blossom Silhouette Die. SKU: SD-DF-020, and the 3" Abstracted Sakura Blossom SKU: SD-DF-019. ***Will not fit in the discontinued Potter USA medium press*** ***Will not fit in the discontinued Potter USA medium press***

Design: 2-5/8" x 3-1/2" Die itself: 7-1/8" x 5-1/2" Coordinated to work with the Rounded Rectangle Dish Former die DF-014 ***Will not fit in the discontinued Potter USA medium press***

Design: 3-3/4" x 2-3/4" Die itself: 7" x 5-1/2" Coordinated to work with the Oval Dish former die DF-006

Design: 3-1/2" x 2-1/2" Die itself: 7" x 5-1/2" Coordinated to work with the Oval Dish former die DF-006

Design: 3-1/2" x 3-3/4" Die itself: 7-15/16" x 5-11/16" Coordinated to work with SD-DF-011, the 3" x 3" Christmas Tree Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***

1527-B Coffin Box Base: 1-1/2" x 1". 3/4" Tall Walls. Designed to be used with 20 GAUGE SHEET METAL. Overall Pancake Die Dimensions: 7" x 5" 1527-T Coffin Box Top: 1-11/16" x 1-1/16". 1/4" Tall Walls. Overall Pancake Die Dimensions: 6" x 4-1/8" *Makes finished box bottom that is 1-1/2" long and 3/4" deep and a box top that is 1-5/8" and 1/4" deep

Design: 3-3/8" x 3-1/2" Die itself: 8" x 5-1/2" Coordinated to work with the 3" Wide Heart Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2" x 2-1/2" Die itself: 8" x 4-1/2" Coordinated to work with the Coffin Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***

1525-B Hexagonal Box Base: 1 1/2" Base x 3/4" Tall Walls . Designed to be used with 20 GAUGE SHEET METAL. Overall Pancake Die Dimensions: 6-1/2" x 4-1/16" 1525-T Hexagonal Box Top: 1 9/16" Base x 1/4" Tall Walls Overall Pancake Die Dimensions: 6-5/16" x 4" *Makes finished box bottom that is 1 1/2" across and 3/4" deep and a box top that is 1 1/2" across and 1/4" deep

1524-B Octagonal Box Base: 1 1/2" Base x 3/4" Tall Walls . Designed to be used with 20 GAUGE SHEET METAL. Overall Pancake Die Dimensions: 7-7/16" x 4-15/16" 1524-T Octagonal Box Top: 1 9/16" Base x 1/4" Tall Walls Overall Pancake Die Dimensions: 7-3/16" x 4-3/4" *Makes finished box bottom that is 1 1/2" across and 3/4" tall and the top is 1 1/2" across and 1/4" deep

1523-B Pentagonal Box Base: 1 1/16" Base x 3/4" Tall Walls . Designed to be used with 20 GAUGE SHEET METAL. Overall Pancake Die Dimensions: 7-7/16" x 5-3/16" ***Will not fit in the discontinued Potter USA medium press*** 1523-T Pentagonal Box Top: 1 1/8" Base x 1/4" Tall Walls Overall Pancake Die Dimensions 6-5/8" x 4-5/16"

1522-B Triangle Box Base: 1 1/2" Base x 3/4" Tall Walls 1522-T Triangle Box Top: 1 9/16" Base x 1/4" Tall Walls * Makes finished box bottom that is 1 1/2" across and 3/4" tall and the lid is 1 1/2" across and 1/4" deep Designed to be used with 20 GAUGE SHEET METAL.

This die can be used to make a lid for the 2" box (made with Pancake Die 1518). Designed to be used with 20 GAUGE SHEET METAL. Cutting area is 3" across each direction at the largest points. The smaller sides are 1/2"" The outer area of the die is 5 1/4" wide x 7 3/4" high. ***Will not fit in the discontinued Potter USA medium press***

This die can be used to make a small box that is 2" x 2" x 1" tall. Designed to be used with 20 GAUGE SHEET METAL. Cutting area is 4" across each direction at the largest points. The smaller sides are 1" The outer area of the die is 7" wide x 8 1/2" high. ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2" diameter. Coordinated to work with the 3" Scalloped Circle Dish Former Silhouette Die ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2"from center to center of each edge Die itself: 7-7/8" x 5-1/2 Coordinated to work with the 3" Rounded Square Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2"from point to center of opposite edge, 3-3/8" from point to point Die itself: 7-7/8" x 5-3/8 Coordinated to work with the 3" Trillion Shape Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***

Design: 3" diameter Die itself: 4 1/4" X 6 3/16"