Pancake Die 1893 - 4" Arabesque 8

Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. Dish -3-7/8" x 2-7/16" Die itself - 4-11/16" wide x 3-7/8" tall, 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

This spacer is 4.5'' x 7.75'' and 1'' thick.

This spacer measures 7-3/4" in length, 4-1/2" in width, and is 1/2" thick. It is nonmagnetic. Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 2-5/8" wide from center of each side. 3" wide from point to point. Overall die size 4-7/8" x 4-1/2". Coordinated to work with the Pancake Die - Hexagon SKU: PD 1539 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

Bag of 10 pieces of urethane for use with impression dies. 95 durometer sheet. Pieces range from approximately 1/2 inch squares. Thickness of each piece is 1/4 inch. Note: These will fray, crack and deform with use, but you will get many uses from them.