Sets, Bundles, and Kits

This mystery box includes a minimum of three Christmas-themed hydraulic press tools, such as pancake dies, impression dies, shot plates, pattern plates, etc. Brand new, never before sold by Potter USA!! Boxes will ship out within 1-2 weeks after the order is placed. *$55 if purchased before July 31. If the box is offered again at a later date, the price will be substantially higher to reflect the actual cost of tools in the box. **THIS BOX IS NOT A PART OF THE MONTHLY SUBSCRIPTION BOX! THIS CHRISTMAS BOX IS A SEPARATE BOX, AND MUST BE ORDERED INDIVIDUALLY. THE DECEMBER SUBSCRIPTION BOX WILL NOT BE HOLIDAY THEMED. NO RETURNS, REFUNDS, OR EXCHANGES.

This bundle contains one pancake die, a matching silhouette die, and a pattern plate for texture.

Use this pancake die to cut two strips of metal (connected by a short tab that is easily removed with saw or shear). These strips, when soldered and formed round, create a pair of telescoping rings. Use the two rings as a lid and container for a poison ring, small container pendant, or just a teeny tiny box. Design: 2" x 1" Die: 6-1/2" x 3-3/8" Longer strip measures: 51mm long x 6mm wide and creates a 17mm (OD) diameter ring. Shorter strip measures: 44mm x 6mm wide and creates a 15mm (OD) diameter ring.. THIS SET IS INTENDED FOR USE WITH 20 GAUGE FULLY HARD Sheet if you want to make a fitted lid and container. If you use a different gauge the parts will not fit as well together. If your metal is not full hard it may become stuck in the die. If you would like to purchase a circle pancake die that fits well with these two rings, the 3/4” diameter and 5/8" diameter circles work well. If you would like to purchase a matching ring blank die, there are many that would work, but PD R16o works perfectly.

This kit includes 5 pancake dies which work together to form a 1" round lidded container. Use this pancake die set with 18-gauge sheet metal to create 1" round boxes with fitted lids! The kit includes pancake dies for two types of lids - over-fitted lids (lids that fit over the container), and inside-fitted lids (lids that have an inner rim that fits down into the container). These small containers are perfect for ring boxes, little gifts, small treasures, pill boxes, or whatever you can think of! We’ve done all the math for you so you don’t have to figure out how to make all the parts fit together yourself - just cut, solder, form, and assemble! **The die measurements have all been done for 18 gauge metal and a snug fitted lid. You can use other gauges (16-22) but it will change the fit of the lid and container. This set includes the following: PD1913: Container body measures 83mm x 20mm, overall die measures 5-3/8" x 5-5/16" PD1914: Over-Fitted Lid measures 91mm x 10mm, overall die measures 5-7/16" x 4-15/16" PD1915: Inside-Fitted Lid Outer Band measures 83mm x 10mm, overall die measures 5-7/16" x 4-15/16" PD1916: Inside-Fitted Lid Inner Band measures 77mm x 10mm, overall die measures 5-7/16" x 4-15/16" PD1917: Lid top and container bottom measures 28mm diameter, overall die measures 3-3/8" x 5-5/8"

PD 1857: Design 3-3/8" x 1-7/8". Die 8-5/8" x 3-7/8". DF-036: Design 3-1/8" x 1-9/16". Die 5" x 3-1/2".

This bundle includes TWO pancake dies that together make a sweet little dog. PD 1870 creates the legs and PD 1869 creates the head/tail. PD1870 Shape measurements: 1-7/8" x 15/16" PD1870 Die measurements: 6-3/8" x 3-5/16" PD1869 Total Shape Measurements: 2-1/4" x 1-1/2" Head Measurements: 1-3/8" x 1-1/4" Tail Measurements: 1-1/4" x 7/16" PD1869 Die measurements: 5-7/8" x 4-1/4"

This bundle includes TWO pancake dies that together make a sweet little bird. PD 1873 creates the wing and PD 1872 creates the body/head. PD1873 Shape measurements: 2-1/16" x 15/16" PD1873 Die measurements: 5-1/2" x 3-3/4" PD1872 Shape Measurements: 3" x 1-3/8" PD1872 Die measurements: 4-15/16" x 6-1/8"

Set of coordinating pancake die and silhouette die Pancake die (PD1880): Design 1-3/16" x 2". Die 6-11/2l16" x 3-15/16". Silhouette Die (SD325): 13/16" x 2". 3" diameter.

Set of coordinating pancake die and silhouette die Pancake die (PD1884): Design 2" x 2-5/8". Die 6-1/2" x 4-1/2". Silhouette Die (SD329): 13/16" x 2". 3" diameter.

Set of coordinating pancake die and silhouette die Pancake die (PD1858): Design 3/4" x 1". Die 5-3/8" x 3-5/16". Silhouette die (SD323): Design 1/2" x 3/4". 2" diameter.

This bundle includes TWO pancake dies that together make a kinetic butterfly pendant. Body (PD 1862): Design 7/8" x 1-7/8". Die 6-1/16" x 3-5/16". Wings (PD 1863): Design 9/16" x 9/16" each, 1-1/2" total width. Die 4-15/16" x 3-5/16".

Set of coordinating pancake die and silhouette die. Pancake die design dimensions (PD1883): 1-1/4" x 1-7/8". (Die itself: 5-11/16" x 4-3/4"). Silhouette die design dimensions (SD328): 9/16" x 1". (Die itself: 2" Diameter).

Set of coordinating pancake die and silhouette die. Pancake die design dimensions (PD1879): 3/4" x 1-1/4". (Die itself: 6-1/4" x 4-3/8"). Silhouette die design dimensions (SD324): 9/16" x 1". (Die itself: 2" Diameter).

Set of coordinating pancake die and silhouette die Pancake die design dimensions (PD1882): 2-3/4" x 1-1/4". (Die itself: 6-1/4" x 4-3/8"). Silhouette die design dimensions (SD327): 1-1/2" x 1". (Die itself: 2" Diameter).

Set of coordinating pancake die and silhouette die Pancake die design dimensions (PD1881): 1-1/4" x 15/16". (Die itself: 6-3/4" x 4-3/8"). Silhouette die design dimensions (SD326): 1" x 11/16". (Die itself: 2" Diameter).

These tiny dishes are perfect for rings, trinkets, or even spice prep for cooking! PD 1851: 1-29/32" x 1-29/32". Die itself: 6-1/2" x 4". DF-035: 1-13/32" x 1-13/32". Die itself: 4-13/32" x 4-13/32".

This bundle includes a pattern plate and two corresponding pancake dies!

This bundle includes all the tools you need to make this striking pair of textured fan earrings. Includes: PD1838: 2" x 7/8". Die itself: 5-3/8" x 4". RMP391: 2" x 6.5". Download the instructions below!

This bundle includes THREE pancake dies that together make a layered Christmas Tree Design. Elements can be soldered together, joined with jump rings, or combined any way you like! PD1841 Shape measurements: 3-1/8" x 1-7/8" PD1841 Die measurements: 7-3/8" x 4-1/2" PD1842 Shape Measurements: 2-1/2" x 1-3/4" PD1842 Die measurements: 6-1/2" x 4-1/8" PD1843 Shape Measurements: 2-1/8" x 1-3/4" PD1843 Die measurements: 6-1/4" x 4-1/8"

Just add leather! This bundle includes all the tools you need to make this panel bracelet. Includes: PD1837: 2" x 1/2" (50 x 13mm). Die 4" x 5" (100 x 128mm.) RMP393: 2" x 6.5". Impression die BR-RT314: 12 x 8.7mm. Download the instructions below!

1834: Left: 19.8 x 14mm. Right: 14.3 x 16.5mm. Die: 5-1/8" x 3-1/2". 1835: Left: 16.8 x 16.5mm. Right: 20.6 x 13mm. Die: 5-1/8" x 3-3/8".

This bundle includes TWO pancake dies that together make a sweet little bow. PD1679 creates the loop shape of the bow and PD1680 creates the ribbon portion of the bow. PD1679 Shape measurements: 2-1/4" x 1/2" PD1679 Die measurements: 4" x 5" PD1680 Shape Measurements: 1" x 3/4" PD1680 Die measurements: 3-7/16" x 5-1/2" Customer samples by Karyn Fawcett

Two versatile tools at a discounted price! Includes PD NOV217A (2-3/8 x 3/4" long) and RMP306 (also available individually).

Get the two tools Lynette used to make these gorgeous earrings at a discounted price. Includes PD1704 and RMP217 (also available individually).

Make your own shot glasses with this specialized tool kit! This toolkit includes: - 4-9/16" Cylindrical Roll Pancake Die - 1-1/4" Circle Pancake Die - Shot Glass Mandrel ***Some products in toolkits have previously been sold separately, but may not be excluded from the toolkit. Duplicates you recieve in with toolkits will not be refunded.

1527-B Coffin Box Base: 1-1/2" x 1". 3/4" Tall Walls. Designed to be used with 20 GAUGE SHEET METAL. Overall Pancake Die Dimensions: 7" x 5" 1527-T Coffin Box Top: 1-11/16" x 1-1/16". 1/4" Tall Walls. Overall Pancake Die Dimensions: 6" x 4-1/8" *Makes finished box bottom that is 1-1/2" long and 3/4" deep and a box top that is 1-5/8" and 1/4" deep

1525-B Hexagonal Box Base: 1 1/2" Base x 3/4" Tall Walls . Designed to be used with 20 GAUGE SHEET METAL. Overall Pancake Die Dimensions: 6-1/2" x 4-1/16" 1525-T Hexagonal Box Top: 1 9/16" Base x 1/4" Tall Walls Overall Pancake Die Dimensions: 6-5/16" x 4" *Makes finished box bottom that is 1 1/2" across and 3/4" deep and a box top that is 1 1/2" across and 1/4" deep

1524-B Octagonal Box Base: 1 1/2" Base x 3/4" Tall Walls . Designed to be used with 20 GAUGE SHEET METAL. Overall Pancake Die Dimensions: 7-7/16" x 4-15/16" 1524-T Octagonal Box Top: 1 9/16" Base x 1/4" Tall Walls Overall Pancake Die Dimensions: 7-3/16" x 4-3/4" *Makes finished box bottom that is 1 1/2" across and 3/4" tall and the top is 1 1/2" across and 1/4" deep

1523-B Pentagonal Box Base: 1 1/16" Base x 3/4" Tall Walls . Designed to be used with 20 GAUGE SHEET METAL. Overall Pancake Die Dimensions: 7-7/16" x 5-3/16" ***Will not fit in the discontinued Potter USA medium press*** 1523-T Pentagonal Box Top: 1 1/8" Base x 1/4" Tall Walls Overall Pancake Die Dimensions 6-5/8" x 4-5/16"

1522-B Triangle Box Base: 1 1/2" Base x 3/4" Tall Walls 1522-T Triangle Box Top: 1 9/16" Base x 1/4" Tall Walls * Makes finished box bottom that is 1 1/2" across and 3/4" tall and the lid is 1 1/2" across and 1/4" deep Designed to be used with 20 GAUGE SHEET METAL.

Set of coordinating pancake die and silhouette die Pancake die dimensions:2-15/16" x 1-11/16"(PD 610A) Silhouette die dimensions: 2" x 7/8" (SD 317) *copper sample not included Watch a video of this project being made here: https://youtu.be/xKa43rJto-I

Bundle includes RMP159 and PD1502. Each domed hemisphere shape is 3/4" tall x ~1-1/2" wide. Each circle is 1/2" diameter. Pancake Die PD1502: Hemisphere 3/4" tall x 1-1/2" wide. Matches Project Plate #3. Matching circle pancake die available separately (PD T100).

Project Plate #2: Shield and 1/2" Circle. Each domed shield shape is 1" tall x ~1-3/8" wide. Each circle is 1/2" diameter. Pancake Die PD1497: Shield 1" tall x ~13/8" wide. Matches Project Plate #2. Matching circle pancake die (PD T100) available separately.

Project Plate #1: Domed Window and 1/2" Circle. Each domed window shape is 1" tall x ~3/4" wide. Each circle is 1/2" diameter. Pancake Die PD1496: Domed Window 1" tall x ~3/4" wide. Matches Project Plate #1. Matching circle pancake die (PD T100) available separately.

Learn how to make these earrings! Layer graduated sizes of scribble-textured, asymmetrical triangle blanks with tubes for a kinetic pair of earrings. In this kit, you will receive 3 mirror-image pairs of asymmetrical triangle pancake dies in different sizes, an intricate Scribbles pattern plate, and instructions on how to make the earrings shown in the listing! Pancake Dies: Lg. Pair 11.4 x 9.5mm each. Medium Pair 13.6 x 10.6mm each. Sm. Pair 14.9 x 12mm each. Pattern Plate: 2" x ~6-3/4". ~1/8" thick.

Learn how to make these Riveted Shield Earrings with a tube-lined hole and ear wire that stays put! In this kit, you will receive a versatile, shield pancake die, an intricate linen-texture pattern plate, and instructions on how to make the earrings shown in the listing! BONUS bracelet instructions included! Pancake Die: 7/8" x 9/16" (22 x 14mm). Pattern Plate: 2" x 7-7/8", approx. 1/8" thick.