Rings/Bezels/Progressive

Pancake Die 1983 Skinny Oval 2-1/2" Long, 1/2" Width

Pancake die for a heart shaped ring design.

Use this pancake die to make a beautiful ring. This die works well with our poison ring container pancake die (PD1938) Design: 3" x 7/8" Die: 5-5/16" x 5"

Use this pancake die to cut two strips of metal (connected by a short tab that is easily removed with saw or shear). These strips, when soldered and formed round, create a pair of telescoping rings. Use the two rings as a lid and container for a poison ring, small container pendant, or just a teeny tiny box. Silver ring samples by Marriane Barton Jennings. Design: 2" x 1" Die: 6-1/2" x 3-3/8" Longer strip measures: 51mm long x 6mm wide and creates a 17mm (OD) diameter ring. Shorter strip measures: 44mm x 6mm wide and creates a 15mm (OD) diameter ring.. THIS SET IS INTENDED FOR USE WITH 20 GAUGE FULLY HARD Sheet if you want to make a fitted lid and container. If you use a different gauge the parts will not fit as well together. If your metal is not full hard it may become stuck in the die. If you would like to purchase a circle pancake die that fits well with these two rings, the 3/4” diameter and 5/8" diameter circles work well. If you would like to purchase a matching ring blank die, there are many that would work, but PD R16o works perfectly.

Use this pancake die to make a beautiful ring or 3 separate bails all cut at the same time (simply cut them apart at each valley). Design: 3/8" x 3" Die: 5" x 4-15/16"

3/4" x 3". Narrowest point 3/16". Die 5-1/2" x 5".

This die measures 4-1/2" x 4-1/2". The design measures 1-5/8" x 1/2" but will cut a progressive strip as long as you want.

This die measures 4-1/2" x 4-1/2". The design measures 1-1/2" x 9/16" but will cut a progressive strip as long as you want.

Design: 1/2" x 3". Die: 4-15/16" x 4-15/16".

Design: 1/2" x 3". Die: 4-15/16" x 4-15/16".

Design: 1-11/16" x 3". Die: 5-5/8" x 4-15/16".

Design: 3/4" x 3". Die: 5-3/16" x 4-15/16".

Design: 7/8" x 3". Die: 5-3/16" x 4-15/16".

Design: 3/4" x 3". Die: 5-1/8" x 4-15/16".

Design: 15/16" x 3". Die: 5-3/8" x 4-15/16".

Design: 1-1/8" x 3". Die: 5-1/2" x 4-15/16".

This progressive pancake die can be used to make a patterned strip as long as you'd like. Perfect for bracelets or rings. 1/2" Wide

1-1/2" wide

1-1/2" wide

1-1/2" wide

This die measures 3" long X 11/16" wide

A fun and festive pumpkin ring pancake die design for use in a hydraulic press. Perfect for this Halloween season! Design: 3" x 10/32"

This pancake die is used to cut blanks of Joni's Gentle Wave Ring in a hydraulic press. Design: 3 7/16" long x 9/16" wide

This pancake die is used to cut blanks of Joni's Gentle Wave Ring in a hydraulic press. Design: 2 13/16" long x 6/16" wide

3/4" x 3-3/8"

1-1/2" x 3"; Band: 1/4"

5/16" x 3"

3/4" x 3"

1" x 3"

This progressive pancake die can be used to make a patterned strip as long as you'd like. Perfect for bracelets or rings. 5/8" Wide

5/8"H x 2-13/16"W

3 5/8"W

5/8"H x 3 1/16"W

7/8" x 3 1/2" or 22mm x 89mm

1 1/8"H x 3 9/16"W or 28.6mm x 90.5mm

7/8"H x 3 1/4"W or 22.2mm x 82.5mm