Dish Former Silhouette Die - Heartleaf

Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" x 2-1/4", 1/4" thick. Die itself 5" x 4.25" Must be used with a large sheet of urethane (available separately). Designed to coordinate with pd2000 ***Will not fit in the discontinued Potter USA medium press***

SKU: SD-DF-044

Must use with urethane sheet (available separately)
Recommended use with 18g or thicker nonferrous metal
Watch Kevin's live video on Facebook for instructions on use: https://www.facebook.com/1640860751/videos/3191288137751079/
Anneal your metal before use and between pressings to prevent it from splitting at the edge of the die
Leave at least 1/4" (preferably 1/2") edge around the shape to allow for the metal to be formed into the die
Can stack two dies and make deeper dishes. Anneal and press multiple times, filling the center of the domed metal with small pieces of urethane and topping it with the urethane sheet.
If your upper platen is smaller/narrower than the shape of the die, place a larger spacer on top of the urethane sheet before use to ensure even pressure.

$40.00

increase decrease

Availability: In stock

Ship to

Shipping Method

Estimated Delivery

Price

No shipping options

Overview

Must use with urethane sheet (available separately)
Recommended use with 18g or thicker nonferrous metal
Watch Kevin's live video on Facebook for instructions on use: https://www.facebook.com/1640860751/videos/3191288137751079/
Anneal your metal before use and between pressings to prevent it from splitting at the edge of the die
Leave at least 1/4" (preferably 1/2") edge around the shape to allow for the metal to be formed into the die
Can stack two dies and make deeper dishes. Anneal and press multiple times, filling the center of the domed metal with small pieces of urethane and topping it with the urethane sheet.
If your upper platen is smaller/narrower than the shape of the die, place a larger spacer on top of the urethane sheet before use to ensure even pressure.

Customers who bought this item also bought

Aluminum Spacer (4.5” x 7.75” x 1”)

Al-Spacer

This spacer is 4.5'' x 7.75'' and 1'' thick.

$39.50

Pancake Die 2000 - Heartleaf

PD 2000

Design: 3.5" x 2.75" Die itself: 7.25" x 5-1/2" Coordinated to work with the Heartleaf Dish Former Silhouette Die (DF-044). ***Will not fit in the discontinued Potter USA medium press***

$44.25

Aluminum Spacer (4.5" x 7.75"x1/2")

Al-SpacerThin

This spacer measures 7-3/4" in length, 4-1/2" in width, and is 1/2" thick. It is nonmagnetic. Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

$28.50

Ear Wire Former No. 2

EWF2

This easy-to-use ear wire jig makes it easy to make repeatable, consistently sized shepherd’s hook-style ear wires. See long description for instructions, and watch the video below (coming soon)! This tool is NOT used in a hydraulic press. Finished ear wire is approx. 25mm long, 10.5mm wide, and features an outward bend in the end of the wire to help secure it in the ear when worn. The loop is approx. 3mm diameter. Recommended for use with 20g wire with a balled-up end.

$84.00

Dish Former Silhouette Die - 3" Oval Belt Buckle

SD-DF-030

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" wide x 2-5/16" tall, 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

$40.00