Pancake Die PD-T132 Circle-3/4in.

Circle: 3/4" diameter Die: ~2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!
SKU: PD T132

This pancake die works in Potter USA’s Tortolita and Rincon hydraulic presses, as well as with any press with a wide enough working surface. If you’re using it with the Tortolita press, you will need a minimum of 4 aluminum spacers.

Tips for Trimming: After cutting the blank, use a jeweler’s saw to remove the tab. If needed, use the metal you remove after cutting the blank as a guide to trace the design onto the tab as a guideline for sawing.

$27.50
increase decrease
Availability: In stock
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options

This pancake die works in Potter USA’s Tortolita and Rincon hydraulic presses, as well as with any press with a wide enough working surface. If you’re using it with the Tortolita press, you will need a minimum of 4 aluminum spacers.

Tips for Trimming: After cutting the blank, use a jeweler’s saw to remove the tab. If needed, use the metal you remove after cutting the blank as a guide to trace the design onto the tab as a guideline for sawing.

Products specifications
Attribute nameAttribute value
Press CompatibilityTortolita, Rincon
Products specifications
Attribute nameAttribute value
Press CompatibilityTortolita, Rincon
Customers who bought this item also bought

Urethane Pieces

UP
Bag of 10 pieces of urethane for use with impression dies. 95 durometer sheet. Pieces range from approximately 1/2 inch squares. Thickness of each piece is 1/4 inch. Note: These will fray, crack and deform with use, but you will get many uses from them.
$8.50

Tortolita - Aluminum Spacers Set of 2

TORT-Al-Spacer
THESE ARE SMALL AND ONLY INTENDED FOR THE TORTOLITA PRESS. 2 Aluminum Spacers machined to fit inside the Tortolita Press. 3" x 2-7/16 x 1/2"
$15.00

Pancake Die PD-T133 Circle-5/8in.

PD T133
Circle: 5/8" diameter Die: ~2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!
$27.50

Pancake Die 1938 Poison Ring Box

PD 1938
Use this pancake die to cut two strips of metal (connected by a short tab that is easily removed with saw or shear). These strips, when soldered and formed round, create a pair of telescoping rings. Use the two rings as a lid and container for a poison ring, small container pendant, or just a teeny tiny box. Design: 2" x 1" Die: 6-1/2" x 3-3/8" Longer strip measures: 51mm long x 6mm wide and creates a 17mm (OD) diameter ring. Shorter strip measures: 44mm x 6mm wide and creates a 15mm (OD) diameter ring.. THIS SET IS INTENDED FOR USE WITH 20 GAUGE FULLY HARD Sheet if you want to make a fitted lid and container. If you use a different gauge the parts will not fit as well together. If your metal is not full hard it may become stuck in the die. If you would like to purchase a circle pancake die that fits well with these two rings, the 3/4” diameter and 5/8" diameter circles work well. If you would like to purchase a matching ring blank die, there are many that would work, but PD R16o works perfectly.
$32.95

Pancake Die PD-T100 Circle-1/2in.

PD T100
Circle: 1/2" diameter Die: ~2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!
$27.50

Pancake Die 1859 Broad Oval

PD 1859
1-9/16" x 1-3/16" Die itself: 5-3/4" x 3-11/16"
$27.50