Claddagh necklace charm, 1-1/4" x 7/16" or 32mm x 11mm Set of 2 in 16 gauge copper

Claddagh Oval Pendant Stamping 1-1/16" x 15/16" or 27mm x 24mm Set of 2 in 16 gauge copper

Small Claddagh charm, 1/2" x 7/16" or 13mm x 11mm Set of 2 in 16 gauge copper

Set of 2, 16 gauge copper panels 1" wide x 1 5/8" high

Four Leaf CLover Link, 5/8" x 3/4" Set of 2 in 16 gauge copper

Set of 2 16 gauge copper 1 1/4" Wide x 1 3/4" High

1 1/2" diameter Set of 2 in 16 gauge copper.

This copper stamping was made from a turn-of-the-century French impression die from the seasons collection. The French word "hiver" means "winter." 1 1/2" in diameter Set of 2 in 16 gauge copper.

Set of 2 in 16 gauge copper. 1 1/2" diameter

20 gauge copper sheet with 32 pre-cut hexagons. Each hexagon is approximately 1" in diameter, the sides each measure 1/2". Shapes are cut leaving two 1mm tabs. Each shape easily twists out of the sheet. Each sheet may come with some surface scratches and discoloration on the copper. Cutouts will have a slight raised bur on the reverse side.

20 gauge copper sheet with 25 pre-cut ovals. Each oval is 1" x 0.5". Ovals are cut leaving two 1mm tabs. Each oval easily twists out of the sheet. Each sheet may come with some surface discoloration on the copper. Cutouts will have a slight raised bur on the reverse side.

20 gauge copper sheet with 25 pre-cut triangles. Each triangle is 1" x 1". triangles are cut leaving two 1mm tabs. Each triangle easily twists out of the sheet. Each sheet may come with some surface discoloration on the copper. Cutouts will have a slight raised bur on the reverse side.

20 gauge copper sheet with 25 pre-cut leaf shapes. Each shape is is 1-1/16" x 1". Shapes are cut leaving two 1mm tabs. Each shape easily twists out of the sheet. Each sheet may come with some surface scratches and discoloration on the copper. Cutouts will have a slight raised bur on the reverse side.

One unfinished stamping from our collection of vintage ornaments. Use a jeweler's saw to cut out the ornament, then finish as desired! Approx. 20 gauge Design: 2-3/4" diameter NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

One unfinished stamping from our collection of vintage ornaments. Use a jeweler's saw to cut out the ornament, then finish as desired! Approx. 20 gauge Design: 2-1/2" x 2-1/2" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

One unfinished stamping from our collection of vintage ornaments. Use a jeweler's saw to cut out the ornament, then finish as desired! Approx. 20 gauge Design: 3-7/8" x 3-1/8 (99mm x 80mm) NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

One unfinished stamping from our collection of vintage ornaments. Use a jeweler's saw to cut out the ornament, then finish as desired! Approx. 20 gauge Design: 3-1/2" x 1-3/4" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

One unfinished stamping from our collection of vintage ornaments. Use a jeweler's saw to cut out the ornament, then finish as desired! Approx. 20 gauge Design: 3-1/8" x 2-5/8" (79mm x 66mm) NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.