Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    20 Ton Standard Jewelry Press (with Jack)

    $1,359.00
    20 Ton Standard Hydraulic Jewelry Press.   Ships freight, fully assembled to your door. No assembly required. Domestic shipping now included! Includes frame, hose, gauge, jack, FREE domestic shipping, urethane pieces, 2 spacers, and a $300 credit to your Potter USA account for pancake dies, silhouette dies, impression dies, and texture plates.
    SKU: 20 ton standard w/ jack
    Availability: In stock

    20 Ton Standard Hydraulic Jewelry Press.  

    Ships freight, fully assembled to your door. No assembly required. Domestic shipping now included!

    Includes frame, hose, gauge, jack, FREE domestic shipping, urethane pieces, 2 spacers, and a $300 credit to your Potter USA account for pancake dies, silhouette dies, impression dies, and texture plates.

    Needs two people to set up due to its weight!

    Please allow 5 to 7 business days in order to prepare this item for shipment.

    International Sites will be charged additional shipping upon review of the order. We will contact you for payment.

    Shipped FREIGHT.  See notes below.

    FREIGHT DELIVERY: Domestic shipping is now included! in the continental US. When order is placed we will do a quote for actual amount of shipping. 

    Truck will deliver to your home - to your door. If there is a request to bring the press inside, there is an additional fee of at least $85 (not included in the cost of the press) that you will be assessed. Any additional requests have fees attached by the shipping company. We will then bill you for the additional fees. If the charge is more, we will notify you and invoice you for the difference in price.  

    The Potter USA Press has been designed to safely and efficiently form metal in a jewelry studio environment. It has many features including its 1/2 inch steel plate construction, with no welds on the entire press (just on the upper and lower platens). Bolts, nuts and support brackets make it extremely strong and rigid. The press is compact and elegantly designed. 

    Must be bolted to a strong table for safe use. Bolt to surface through the feet, using 1/2 13 thread bolt or a strong C-clamp. So not use a portable tool chest or any other light table, as it can all fall over during use.

    The upper platen is 8 inches wide x 5 in deep, and the Lower Platen is 8 inches wide x 6 inches deep x 1 inch thick resist flexing and distortion under the most extreme use.

    The upper platen is held in with a bolt and is removable. The upper and lower platens can be replaced with 8 in x 8 in aluminum platens, available for order on our website.

    Outer Dimensions: 23 inches high x 16.5 inches wide x 7 inches long.

    The space between platens is approx. 7 inches if you use a standard height jack, and 9 inches if you use a low profile jack. The low profile jack allows for more space to do deep-draw work.

    The frame has a lifetime warranty. Should it ever be damaged or malfunction in anyway, it will be repaired or replaced at no cost.

    Press is made of 1/2" thick steel plate. It has been tested to far exceed the 20 ton rating. The frame and platens are powder-coated. This is a very durable finish.

    Attributes:

      • Affordable
      • Highly compact
      • Bench mounted
      • Very easy to use
      • Many accessories available
      • Works with other press manufacturer's accessories
      • Lifetime Warranty on press frame
      • Space between platens: 7 inches with a standard height jack or 9 inches with a low profile jack.
      • 6 inch deep x 8 inch wide lower platen
      • Outer dimensions: 23 inches High x 19 inches wide x 10 inches deep.
      • Frame is made to allow for transition to an electric hydraulic system if requested.

     

    20 Ton Standard Hydraulic Jewelry Press.  

    Ships freight, fully assembled to your door. No assembly required. Domestic shipping now included!

    Includes frame, hose, gauge, jack, FREE domestic shipping, urethane pieces, 2 spacers, and a $300 credit to your Potter USA account for pancake dies, silhouette dies, impression dies, and texture plates.

    Needs two people to set up due to its weight!

    Please allow 5 to 7 business days in order to prepare this item for shipment.

    International Sites will be charged additional shipping upon review of the order. We will contact you for payment.

    Shipped FREIGHT.  See notes below.

    FREIGHT DELIVERY: Domestic shipping is now included! in the continental US. When order is placed we will do a quote for actual amount of shipping. 

    Truck will deliver to your home - to your door. If there is a request to bring the press inside, there is an additional fee of at least $85 (not included in the cost of the press) that you will be assessed. Any additional requests have fees attached by the shipping company. We will then bill you for the additional fees. If the charge is more, we will notify you and invoice you for the difference in price.  

    The Potter USA Press has been designed to safely and efficiently form metal in a jewelry studio environment. It has many features including its 1/2 inch steel plate construction, with no welds on the entire press (just on the upper and lower platens). Bolts, nuts and support brackets make it extremely strong and rigid. The press is compact and elegantly designed. 

    Must be bolted to a strong table for safe use. Bolt to surface through the feet, using 1/2 13 thread bolt or a strong C-clamp. So not use a portable tool chest or any other light table, as it can all fall over during use.

    The upper platen is 8 inches wide x 5 in deep, and the Lower Platen is 8 inches wide x 6 inches deep x 1 inch thick resist flexing and distortion under the most extreme use.

    The upper platen is held in with a bolt and is removable. The upper and lower platens can be replaced with 8 in x 8 in aluminum platens, available for order on our website.

    Outer Dimensions: 23 inches high x 16.5 inches wide x 7 inches long.

    The space between platens is approx. 7 inches if you use a standard height jack, and 9 inches if you use a low profile jack. The low profile jack allows for more space to do deep-draw work.

    The frame has a lifetime warranty. Should it ever be damaged or malfunction in anyway, it will be repaired or replaced at no cost.

    Press is made of 1/2" thick steel plate. It has been tested to far exceed the 20 ton rating. The frame and platens are powder-coated. This is a very durable finish.

    Attributes:

      • Affordable
      • Highly compact
      • Bench mounted
      • Very easy to use
      • Many accessories available
      • Works with other press manufacturer's accessories
      • Lifetime Warranty on press frame
      • Space between platens: 7 inches with a standard height jack or 9 inches with a low profile jack.
      • 6 inch deep x 8 inch wide lower platen
      • Outer dimensions: 23 inches High x 19 inches wide x 10 inches deep.
      • Frame is made to allow for transition to an electric hydraulic system if requested.

     

    Customers who bought this item also bought

    6 x 8 Aluminum Spacer

    $32.00
    This spacer is 6''  x  8''  and 1'' thick. Non magnetic Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use metal pieces on lower platen to take up space between platens.

    Urethane Pieces

    $5.25 $7.00
    Bag of 10 pieces of urethane for use with impression dies. 95 durometer sheet. Pieces range from approximately 1/2 inch to 1 inch in length. Thickness of each piece is 1/4 inch.  Note: These will fray, crack and deform with use, but you will get many uses from them.

    In stock

    Bracelet Former Kit

    $300.00 $350.00
    Bracelet Former Kit to be used with 20 Ton hydraulic press. Our Bracelet Former Frame is now magnetic - no adapter plate needed! Great to use our bracelet pancake dies to cut the metal first, then form with our Bracelet Former Kit, for quick cuff bracelets.

    Out of stock

    Tool Steel Pusher

    $55.00
    This is a tool steel pusher used with impression dies and pattern bars. 

    3 Inch Urethane - 95 Durometer

    $23.62 $31.50
    3 inch diameter x 1 inch thick, 95 durometer urethane insert. Can be used with or without a container. If over-squeezed without a container, it will crack. COLOR WILL VARY.