Previous productPancake Die 1954 Boot Lace ...
Next productPancake Die 1596 - Marker
Picture of Pancake Die 598 Puzzle Piece Picture of Pancake Die 598 Puzzle Piece

Pancake Die 598 Puzzle Piece

Puzzle piece. 1" wide and 1" high at beginning of the tab. Note: The piece does not interlock with itself.
SKU: PD 598

Puzzle piece 1" x 1"

Potter USA Pancake Die Information:

  1. The pancake dies are designed to cut non-ferrous metal (copper, silver, brass, gold, nickel) 20 gauge and thicker to about 16 gauge.
  2. They work best when the metal is hard. If the metal is too soft, you will get a burr and it will be difficult to remove your part from the die. DO NOT ANNEAL METAL FIRST.
  3. The dies only work in one direction - with words FACE DOWN
  4. I will send them to you pre-sprung so that you know where to put the metal.
  5. If you use metal that is too thick or too thin, it is possible to damage the die.
  6. As long as you stay within the recommended gauges, the dies should last you many years under normal use.
$27.50
increase decrease
Availability: In stock
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options

Puzzle piece 1" x 1"

Potter USA Pancake Die Information:

  1. The pancake dies are designed to cut non-ferrous metal (copper, silver, brass, gold, nickel) 20 gauge and thicker to about 16 gauge.
  2. They work best when the metal is hard. If the metal is too soft, you will get a burr and it will be difficult to remove your part from the die. DO NOT ANNEAL METAL FIRST.
  3. The dies only work in one direction - with words FACE DOWN
  4. I will send them to you pre-sprung so that you know where to put the metal.
  5. If you use metal that is too thick or too thin, it is possible to damage the die.
  6. As long as you stay within the recommended gauges, the dies should last you many years under normal use.
Customers who bought this item also bought
Picture of Pancake Die 000 Blank

Pancake Die 000 Blank

PD 000
Our redesigned pancake dies are here! Die: 4-11/16" H x 3" W Working Area: 1-5/8" H x 2-3/4" W
$23.00
Picture of Pancake Die 610 Medium Dog Tag

Pancake Die 610 Medium Dog Tag

PD 610
Medium Dog tag is 2 1/8" x 1 3/16"
$27.50
Picture of Pancake Die 641 Large Guitar Pick

Pancake Die 641 Large Guitar Pick

PD 641
Our redesigned pancake dies are here! Pick: 1" wide x 1 1/8" long
$27.50
Picture of Pancake Die 597 Fleur de Lis

Pancake Die 597 Fleur de Lis

PD 597
This Fleur de lis die is quite popular. It is a little more difficult to remove the metal from the die when cut due to the complexity of the cut - but it works. This die measures 1 5/8" x 1 1/8"
$27.50
Picture of Pancake Die Bracelet B000 Blank

Pancake Die Bracelet B000 Blank

PD B000
Cut out your own Bracelet shaped die with a jeweler's saw.
$41.75
Picture of Urethane Pieces

Urethane Pieces

UP
Bag of 10 pieces of urethane for use with impression dies. 95 durometer sheet. Pieces range from approximately 1/2 inch squares. Thickness of each piece is 1/4 inch. Note: These will fray, crack and deform with use, but you will get many uses from them.
$8.50