Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Pancake Die PD-T121 Rectangle-6x12mm

    $27.50
    Rectangle: 6 x 12mm diameter Die: ~2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!
    SKU: PD T121
    Ship to
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options
    Availability: In stock

    This pancake die works in Potter USA’s Tortolita and Rincon hydraulic presses, as well as with any press with a wide enough working surface. If you’re using it with the Tortolita press, you will need a minimum of 4 aluminum spacers.

    Tips for Trimming: After cutting the blank, use a jeweler’s saw to remove the tab. If needed, use the metal you remove after cutting the blank as a guide to trace the design onto the tab as a guideline for sawing.

    This pancake die works in Potter USA’s Tortolita and Rincon hydraulic presses, as well as with any press with a wide enough working surface. If you’re using it with the Tortolita press, you will need a minimum of 4 aluminum spacers.

    Tips for Trimming: After cutting the blank, use a jeweler’s saw to remove the tab. If needed, use the metal you remove after cutting the blank as a guide to trace the design onto the tab as a guideline for sawing.

    Customers who bought this item also bought

    Aluminum Spacer (4.5” x 7.75” x 1”)

    Al-Spacer
    $34.75
    This spacer is 4.5'' x 7.75'' and 1'' thick. Non magnetic Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

    Pancake Die PD-T123 Trillion 12mm

    PD T123
    $27.50
    Trillion: 12 x 12mm diameter Die: ~2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!

    Pancake Die PD-T122 Rectangle-6x9mm

    PD T122
    $27.50
    Rectangle: 6 x 9mm diameter Die: ~2-3/8" x 4-5/8". Designed to work with the Tortolita and Rincon presses!

    Aluminum Spacer (4.5" x 7.75"x1/2")

    Al-SpacerThin
    $21.50
    This spacer measures 7-3/4" in length, 4-1/2" in width, and is 1/2" thick. It is nonmagnetic. Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

    Pancake Die R140 Statement Saddle Ring

    PD R140
    $30.50
    Design: 1-11/16" x 3". Die: 5-5/8" x 4-15/16".