Pancake Die 1637 Medium Wide Irregular Oval

This die must be used in a hydraulic press. Shape measures 1-1/4" x 7/8". Overall die measures 5-3/4" x 3-3/8". This die pairs well with PD 1636 and 1637.

Design: 1 -5/16" x 5/8" Die itself: 4-9/16"" X 3-3/8" Sample earrings by Lynette Andreasen

This die must be used in a hydraulic press. Shape measures 1" x 1/2". Overall die measures 5-1/2" x 3-3/8". This die pairs well with PD 1637 and 1638.

This spacer is 4.5'' x 7.75'' and 1'' thick.

Pancake Die - Small Spear 1-1/16 inches wide by 1/2 inch. Die itself 4-7/16" x 3-5/16". Sample earrings by Lynette Andreasen

This spacer measures 7-3/4" in length, 4-1/2" in width, and is 1/2" thick. It is nonmagnetic. Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.