Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Flat-top Domed Steel Dishing Set

    $120.00
    2-1/2" Diameter; perfect for forming dishes Set of 3 different flat-top dome sizes: shallow, medium, high Can be used on a tabletop with a plastic/rawhide mallet or in a hydraulic press (see full description for more details)
    SKU: Flat-top Dishing Set

    Tabletop use: Use a ball-peen hammer and urethane puck to sink an annealed disc into a shallow dome. Place the disc on top of the shallowest former, and use a plastic/rawhide mallet to form the disc. Anneal, and use progressively larger formers until you achieve the desired dome. This video uses a full-dome set, but the techniques are the same: https://www.facebook.com/kevin.potter.12935/videos/10216069637607318/

    Hydraulic press: Must be used with our magnetic tool steel pusher and a 2" or 3" 95 durometer urethane puck. You MUST center the former on the pusher, and center the pusher on the upper platen of your press (check front to back and side to side). Place annealed metal on the urethane, and press the former into it; you won't be able to form the entire disc in one pressing. Repeat to press multiple times, rotating the metal as needed, to create a smooth dome. Repeat with progressively larger formers until you achieve the desired dome.This video uses a full-dome set, but the techniques are the same:  https://www.facebook.com/kevin.potter.12935/videos/10216069690328636/

    Tabletop use: Use a ball-peen hammer and urethane puck to sink an annealed disc into a shallow dome. Place the disc on top of the shallowest former, and use a plastic/rawhide mallet to form the disc. Anneal, and use progressively larger formers until you achieve the desired dome. This video uses a full-dome set, but the techniques are the same: https://www.facebook.com/kevin.potter.12935/videos/10216069637607318/

    Hydraulic press: Must be used with our magnetic tool steel pusher and a 2" or 3" 95 durometer urethane puck. You MUST center the former on the pusher, and center the pusher on the upper platen of your press (check front to back and side to side). Place annealed metal on the urethane, and press the former into it; you won't be able to form the entire disc in one pressing. Repeat to press multiple times, rotating the metal as needed, to create a smooth dome. Repeat with progressively larger formers until you achieve the desired dome.This video uses a full-dome set, but the techniques are the same:  https://www.facebook.com/kevin.potter.12935/videos/10216069690328636/

    Customers who bought this item also bought

    3 Inch Urethane - 75 Durometer

    $31.50
    3 inch diameter x 1 inch thick, 75 durometer urethane insert. Can be used with or without a container. If over-squeezed without a container, it will crack. COLOR WILL VARY.

    Out of stock

    3 x 2 contained urethane w/pusher

    $73.50
    3 inch diameter x 2 inch height contained urethane with metal pusher (pusher not pictured). Comes with 95 durometer urethane.  ***You can use this with 2 inch silhouette dies, BUT, the impression will not be able to get as deep as with the 2 x 2 contained urethane. NOT for use with impression dies.

    Copper Sheet 20 Gauge 5" x 8"

    $8.75
    Plain copper sheet, 20 gauge.  5 inch x 8 inch piece CDA #110; 99.9% pure

    2 x 2 Contained Urethane with Pusher

    $63.00
    2 x 2 contained urethane with pusher for use with our standard, 2 inch silhouette dies. Comes with container, 95 durometer urethane and metal pusher. NOT for use with impression dies.

    Out of stock

    Tool Steel Pusher

    $55.00
    This is a tool steel pusher used with impression dies and pattern bars.