Aluminum Spacer (4.5" x 7.75"x1/2")

Name: Aluminum Spacer (4.5" x 7.75"x1/2")
SKU: Al-SpacerThin
Price: 28.50 USD
Availability: InStock

This spacer measures 7-3/4" in length, 4-1/2" in width, and is 1/2" thick. It is nonmagnetic. Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

SKU: Al-SpacerThin

This spacer measures 7-3/4" in length, 4-1/2" in width, and is 1/2" thick. It is nonmagnetic.
Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press.
Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

$28.50

increase decrease

Availability: In stock

Ship to

Shipping Method

Name

Estimated Delivery

Price

No shipping options

Overview

This spacer measures 7-3/4" in length, 4-1/2" in width, and is 1/2" thick. It is nonmagnetic.
Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press.
Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

Product tags

press (4)
,
spacer (2)
,
space (2)
,
spacers (2)
,
aluminum (2)
,
6 x 8 (2)

Customers who bought this item also bought

Aluminum Spacer (4.5” x 7.75” x 1”)

Al-Spacer

This spacer is 4.5'' x 7.75'' and 1'' thick.

$39.50

Urethane Pieces

Bag of 10 pieces of urethane for use with impression dies. 95 durometer sheet. Pieces range from approximately 1/2 inch squares. Thickness of each piece is 1/4 inch. Note: These will fray, crack and deform with use, but you will get many uses from them.

$8.50

Rincon Press LAYAWAY $100

Rincon Press LAYAWAY

This option is for LAYAWAY Payment for the NEW Rincon Press. Manual: $995 thru 8/23/25 starting 8/24/25, price will be $1,295 Electric: $3,045 This is our newest, most compact, and most economical 20-ton jewelry hydraulic press. This press will work with pancake dies, impression dies, silhouette dies, and even our bracelet-forming frame. Please note: Layaways started 8/19/25 will be $1,295 plus tax if applicable. Any layaways already in progress will continue at the price in effect when they were started.

$100.00

2" Magnetic Tool Steel Pusher

Pusher-1

Tool Steel Magnetic Pusher to be used on impression dies in a hydraulic press. 2" diameter. Approx. 3/4" tall, including 1/4" tool steel face. Attaches to upper platen with a magnet.

$35.00

Rincon Press - Manual - 20-Ton

RIN-MAN

Please read the description before purchasing. Named after one of the mountain ranges that surround Potter USA, the Rincon Press is our newest, most compact, and most economical 20-ton jewelry hydraulic press. This press will work with pancake dies, impression dies, silhouette dies, and even our bracelet-forming frame.

$1,295.00

Tool Steel Magnetic Ring Pusher

Pusher 2 - Ring

This tool steel ring pusher will give you greater detail in your rings when used on impression dies in a hydraulic press. Size: 3" x 1-1/2"

$45.00