Aluminum Spacer (4.5" x 7.75"x5/8")

Name: Aluminum Spacer (4.5" x 7.75"x5/8")
SKU: Al-Spacer5/8
Price: 29.75 USD
Availability: InStock

This spacer measures 7-3/4" in length, 4-1/2" in width, and is 5/8" thick. It is nonmagnetic. Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

SKU: Al-Spacer5/8

This spacer measures 7-3/4" in length, 4-1/2" in width, and is 5/8" thick. It is nonmagnetic.
Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press.
Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

$29.75

increase decrease

Availability: In stock

Ship to

Shipping Method

Name

Estimated Delivery

Price

No shipping options

Overview

This spacer measures 7-3/4" in length, 4-1/2" in width, and is 5/8" thick. It is nonmagnetic.
Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press.
Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

Product tags

press (5)
,
spacer (3)
,
space (3)
,
spacers (3)
,
aluminum (3)
,
6 x 8 (3)

Customers who bought this item also bought

Aluminum Spacer (4.5” x 7.75” x 1”)

Al-Spacer

This spacer is 4.5'' x 7.75'' and 1'' thick.

$39.50

Copper Sheet 18 Gauge 5" x 8"

CS 18

Copper Sheet 18 Gauge 5" x8". Fully hard CDA # 110; 99.9% PURE.

$18.00

Urethane Pieces

Bag of 10 pieces of urethane for use with impression dies. 95 durometer sheet. Pieces range from approximately 1/2 inch squares. Thickness of each piece is 1/4 inch. Note: These will fray, crack and deform with use, but you will get many uses from them.

$8.50

2" Magnetic Tool Steel Pusher

Pusher-1

Tool Steel Magnetic Pusher to be used on impression dies in a hydraulic press. 2" diameter. Approx. 3/4" tall, including 1/4" tool steel face. Attaches to upper platen with a magnet.

$35.00

Aluminum Spacer (4.5" x 7.75"x1/2")

Al-SpacerThin

This spacer measures 7-3/4" in length, 4-1/2" in width, and is 1/2" thick. It is nonmagnetic. Spacers are used in the press to lessen the amount of effort needed to extend the jack and activate the items being used in the press. Top and bottom platens are not meant to touch - it will cause the jack to overextend and cause leaking, or for jack to fail. Always use spacers on lower platen to take up space between platens.

$28.50

Ring Template

RingTemplate

Ring Template with 3 different ring shapes cut into 16ga steel. Small - 2-7/8" x 7/16" (73mmx12mm), Medium - 2-7/8" x 9/16" (73mmx15mm), Large - 2-7/8" x 5/8" (73mmx16mm). Overall template measures 98mm x 79mm.

$12.00