Design: 1" x 1/2" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard or high-production Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 7/8" x 9/16" (22 x 14mm). (Same size/shape as PD1491 that's included in the Riveted Shield Earrings Kit.) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard or high-production Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design Size: 2" x ~6-11/16" Designed for use in a rolling mill.

This asymmetrical rectangle features two opposing corners with a curved radius. Perfect for earrings or back plates for contemporary designs. Design: 1" x 1-1/2" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

This asymmetrical rectangle features two opposing corners with a curved radius. Perfect for earrings or back plates for contemporary designs. Design: 11/16" x 1" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Design: 2-5/8" x 3-1/2" Die itself: 7-1/8" x 5-1/2" Coordinated to work with the Rounded Rectangle Dish Former die DF-014 ***Will not fit in the discontinued Potter USA medium press*** ***Will not fit in Rincon Press

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 2-13/16" x 1-15/16" 1/4" thick. Must be used with a large sheet of urethane (available separately).

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill. Sample earrings by Lynette Andreasen

Design Size: approximately 1-3/4" x 6-7/8" Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" diameter. Coordinated to work with Pancake Die 1538 Sakura Blossom 1/4" thick. Die outer measurements: 4-7/8" x 4-3/4" Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" diameter. Coordinated to work with the Pancake Die - Geometric 5-Pointed Shape SKU: PD 1536 1/4" thick. Outside measurements of die: 4-7/8" x 4-3/4" Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2"from center to center of each edge Die itself: 7-3/4" x 5-1/2 Coordinated to work with BOTH the 3" Sakura Blossom Silhouette Die. SKU: SD-DF-020, and the 3" Abstracted Sakura Blossom SKU: SD-DF-019. ***Will not fit in the discontinued Potter USA medium press*** ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2"from center to center of each edge Die itself: 7-3/4" x 5-1/2 Coordinated to work with the 3" Sakura Blossom Silhouette Die. SKU: SD-DF-021 ***Will not fit in the discontinued Potter USA medium press***

Gnome is 3" tall x 1-1/2" wide. Die itself is 6-1/2" x 4-7/8". Will not fit in the discontinued medium press.

2-7/8" wide by 1-7/8" tall. Die itself is 6-1/4" x 5". Will not fit in the discontinued medium press.

3" tall x 1.5" wide. Die itself is 5-7/8" x 5". ***Will not fit in the discontinued Potter USA medium press***

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 2-1/2" wide x 3" tall. Overall die size 4-7/8" x 4-7/16". Coordinated to work with the Pancake Die -Hamsa SKU: PD 1548 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

3" tall x 1-9/16" wide. Die itself is 5-15/16" x 5". ***Will not fit in the discontinued Potter USA medium press***

Gnome is 1" tall x 1/2" wide. Die itself is 5-1/16" x 3-1/2".

Gnome is 1-1/2" tall x 3/4" wide. Die itself is 5-1/2" x 3-1/2".

Design Size: approximately 1-25/32" x 1-25/32" each Designed for use in a rolling mill. Coordinates with PD 1577

Design Size: approximately 1-3/16" x 1-3/16" each Designed for use in a rolling mill.

Design: 3-1/2" x 3". Die itself: 7-1/2" x 5-9/16". Coordinated to work with SD-DF023. ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2" x 3-7/16". Die itself: 7-7/8" x 5-7/16". Coordinated to work with SD-DF024. ***Will not fit in the discontinued Potter USA medium press***

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, small containers, etc. Design: 3-1/16" x 2-1/2". Die Itself: 5" x 4-5/8" Works with PD 1551. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, small containers, etc. Design: 3" x 3". Die Itself: 4-15/16" x 4-7/8". Works with PD 1552. Must be used with a large sheet of urethane (available separately).

Design Size: approximately 2-15/16" x 5/16" Designed for use in a rolling mill.

1/4" x 3/4"