Design: 15/16" x 3/4"

Design: 1-3/16" x 1"

10 x 8.7mm.

Design: 9/16" x 5/8"

Width: 0.5" 16-gauge Set of two 6" long pieces. Patterned Copper Made with a roll from the Cranston Fancy Wire Company.

Design: 1-1/2" x 1" Oval Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

This split scales pattern is perfect for mermaid, dragon, or reptilian designs! This listing is for one pattern plate; see the second photo for explanation of the three items in the photo. 2" x 6-3/4" x ~1/8"

Design Size: approximately 1-3/4" x 6-7/8" Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Each cuff is approximately 6.5" long. The bracelet is made from 16-gauge copper that has been coated with a heavy-duty industrial silver plating (with a nickel base layer), similar to the heavy silver-plate of silverware. CANNOT be soldered, filed, or sanded (plating will be removed). CAN be lightly polished, slightly re-formed with non-marring forming tools, and patinated. Bracelets are all made from the same pattern but because they are rolled by hand they may have some inconsistencies and not be exactly identical. The inside surface and edges of the cuff may have small dings, scratches, and other imperfections; these are not considered defects. NOTE: This batch is NOT stamped "Silver Plated." Width: 1/4"

Design: Design Size: 2" x 6-3/4"; ~1/8" thick

Design: 1-1/2" x 3/4" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard or high-production Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Hand-carved by renowned engraver, Bill Rice, this extra-skinny version of his popular hummingbird design pairs well with pancake die B019. This listing is for one pattern plate; see the second photo for explanation of the three items in the photo. ~3/4" x 6" (18.5mm x 15.1cm)

Design Size: approximately 2-7/8" x 1/4" Designed for use in a rolling mill.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 3/4" x 13/16" or 19.05mm x 20.25mm NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 25/32" or 20mm NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 5/8" x 5/8" x 26mm x 26mm NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 2-1/4" x 1/2" or 56mm x 13mm NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 3/8" x 1/4" or 9mm x 7mm each NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 7/16" x 7/16" or 12mm x 12mm NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 11/16" x 11/16" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Design: 1-1/2" diameter Circle Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1" diameter circle Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" wide x 1.5" tall, 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 2.5" long x 2.25" wide Pie Slice 1/4" thick. Must be used with a large sheet of urethane (available separately). ***Will not fit in the discontinued Potter USA medium press***

Design Size: approximately 2-15/16" x 3/8" Designed for use in a rolling mill.

We've brought back this popular design from the November 2017 subscription box, but in a different size! 1-5/16" x 1-5/16" (33 x 33mm)

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

This listing is for one pattern plate; see the second photo for explanation of the three items in the photo. Design: 1-11/16" x 6-3/4" x ~1/8"

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

The design is 1-7/8" x 2"

Design Size: approximately 2" x 6-7/8" Each heart measures about 1-1/2” x 1-3/8”. Coordinated to work with Pancake Die 1595 - Heart. Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

2" x 6-3/4" Designed for use in a rolling mill.