Potter USA - Fine Tools. New

Pancake Die 1688 - Pod

PD 1688

$27.50

This die must be used in a hydraulic press. Design: 13/16" x 7/16" (21mm x 11mm). Overall die measures 3-3/8" x 5-3/16".

Pancake Die 1689 - Tri Petal

PD 1689

$27.50

This die must be used in a hydraulic press. Design: 13/16" x 3/4" (20mm x 19mm). Overall die measures 3-3/8" x 5-3/16".

Pancake Die 1690 - Shield Crystal

PD 1690

$27.50

This die must be used in a hydraulic press. Design: 1/2" x 3/4" (13mm x 22mm). Overall die measures 3-3/8" x 5-3/16".

Pattern Plate RMP314 Trilobites

RMP314

$39.00

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Pattern Plate RMP315 Fountain Splash

RMP315

$39.00

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Pancake Die 1660 Mystic Cat

PD 1660

$27.50

Cat: 39 x 16.5mm. Die: 5-3/4" x 3-1/2"

Pattern Plate RMP316 Field of Feathers

RMP316

$39.00

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Impression Die Toad Spoon Handle

TR-NS021

$70.00

Design: 3-11/16" x 19/32" Tharpe Robbins Providence, Rhode Island

Pattern Plate RMP318 Bat Migration

RMP318

$39.00

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Pattern Plate RMP137 True North

RMP137

$39.00

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill. This pattern plate was originally a black Friday giveaway in 2021.

Pattern Plate RMP319 Barbed Bands

RMP319

$39.00

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Pancake Die 1703 Pearl Onion

PD 1703

$27.50

This die must be used in a hydraulic press. Design: 13/16" x 13/16" (21mm x 21mm). Overall die measures 3-3/8" x 5-3/16".

Pancake Die 1702 Moth in Flight

PD 1702

$27.50

This die must be used in a hydraulic press. Design: 1-5/16" x 13/16" (34mm x 20mm). Overall die measures 3-3/8" x 5-1/4".

Pancake Die 1705 Small Car

PD 1705

$27.50

This die must be used in a hydraulic press. Design: 5/8" x 1-1/2". Overall die measures 5" x 3-7/16".

Pancake Die 1706 Large Car

PD 1706

$33.25

This die must be used in a hydraulic press. Design: 1-1/8" x 3". Overall die measures 5-1/2" x 5".

Pancake Die 1673 Fancy Barrette

PD 1673

$33.25

This die must be used in a hydraulic press. Design: 1" x 3-1/4". Overall die measures 5-3/8" x 5-3/8".

Pancake Die 1708 Cute Penguin

PD 1708

$27.50

This die must be used in a hydraulic press. Design: 1-1/4" x 7/8". Overall die measures 5-3/8" x 3-1/2".

FSS (Fast Stamping System) Die Set FSS-058 Medium Trillion

FSS-058

$70.00

Design: 13/16" x 13/16" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE STANDARD FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Pattern Plate RMP323 Chevron Wallpaper

RMP323

$39.00

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

FSS (Fast Stamping System) Die Set FSS-059 Small Trillion

FSS-059

$70.00

Design: 9/16" x 9/16" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE STANDARD FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

FSS (Fast Stamping System) Die Set FSS-060 Large Trillion

FSS-060

$70.00

Design: 1-1/4" x 1-1/4" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE STANDARD FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Pattern Plate RMP324 Celtic Knot Circles

RMP324

$39.00

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Pattern Plate RMP325 Morse Code

RMP325

$39.00

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Pattern Plate RMP326 Brain Teaser

RMP326

$39.00

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

UNKNOWN METAL “Religious Stamping” (3 for $20)

CS354

$20.00

Approx. 16 gauge Design: 5/8” diameter

UNKNOWN METAL “Big Religious Stamping (3 for $20)”

CS355

$20.00

Approx. 16 gauge Design: 3/4” diameter

Bronze Stamping “Star (3 for $20)”

CS356

$20.00

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 3/4” diameter NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Pattern Plate RMP327 Be Not Afraid

RMP327

$39.00

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

UNKNOWN METAL "Religious Stamping III (3 for $20)"

CS362

$20.00

Approx. 16 Gauge Design: 1/2" x 3/4"

UNKNOWN METAL "Religious Stamping IV (3 for $20)"

CS363

$20.00

Approx. 16 Gauge Design: 3/4" x 1"

UNKNOWN METAL "Religious Stamping V (3 for $20)"

CS364

$20.00

Approx. 16 Gauge Design: 7/8" x 3/8"

UNKNOWN METAL "Religious Stamping VI (3 for $20)"

CS365

$20.00

Approx. 16 Gauge Design: 3/4" x 1"

Pattern Plate RMP328 Coffee Beans

RMP328

$39.00

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Pattern Plate RMP329 Pine Cones

RMP329

$39.00

Overall Design Size: approximately 2" x 7" Designed for use in a rolling mill.

FSS (Fast Stamping System) Die Set FSS-062 Large Oblong

FSS-062

$70.00

Design: 1-1/4" x 29/32" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.

FSS (Fast Stamping System) Die Set FSS-063 Small Oblong

FSS-063

$70.00

Design:7/8" x 9/16" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe.