Width: 1.25" 16-gauge Set of two 6" long pieces. Patterned Copper Made with a roll from the Cranston Fancy Wire Company.

Width: 0.74" 16-gauge Set of two 6" long pieces. Patterned Copper Made with a roll from the Cranston Fancy Wire Company.

Design: 1-7/8" x 1-1/8" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design: 1-1/4" x 1-1/16" Guitar Pick Shape Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design Size: approximately 2-15/16" x 5/16" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Design Size: approximately 2-15/16" x 5/16" Designed for use in a rolling mill.

We've brought back this popular design from the November 2017 subscription box, but in a different size! 5/8" x 5/8" (16.5 x 16.5mm)

Each cuff is approximately 6.5" long. The bracelet is made from 16-gauge copper that has been coated with a heavy-duty industrial silver plating (with a nickel base layer), similar to the heavy silver-plate of silverware. CANNOT be soldered, filed, or sanded (plating will be removed). CAN be lightly polished, slightly re-formed with non-marring forming tools, and patinated. Bracelets are all made from the same pattern but because they are rolled by hand they may have some inconsistencies and not be exactly identical. The inside surface and edges of the cuff may have small dings, scratches, and other imperfections; these are not considered defects. NOTE: This batch is NOT stamped "Silver Plated." Width: 1/2"

Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Design Size: approximately 2-7/8" x 5/16" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

This shape, a smaller version of a bracelet pancake die we offer, is the perfect size for an average-size barrette or as a focal piece in a chain or leather bracelet. Great for making a matched set. 3-1/4" x 11/16"

This shape, a smaller version of a bracelet pancake die we offer, is the perfect size for an average-size barrette or as a focal piece in a chain or leather bracelet. Great for making a matched set. 3-1/4" x 1"

Design: 1" x 1" Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Design Size: 2" x ~6-3/16". Each strip of pattern is approximately 3/8" wide. This pattern can be used to make individual jewelry pieces like earrings and cuff links, as well as embellishments for other pieces.

This listing is for one pattern plate; see the second photo for explanation of the three items in the photo. Each Ring Design is : 2 7/8" long x 3/8" wide

Set of matching pancake die and silhouette die Pancake die dimensions: 1-9/16" diameter (PD 1300) Silhouette die dimensions: 1-3/16" diameter (SD 245)

The Quick-Form Press , invented in 2022 by Kevin Potter, combines the power of a kick-press with the ease of use of a hand-operated arbor press. The key to how this press operates is the cam. Unlike an arbor press, which has a linear force that limits the amount of pressure possible, the Quick-Form Press utilizes a cam that allows you to exert maximum force with minimal effort! Whether you're bending rings, cuff bracelets, napkin holders, or silverware, this all-in-one press provides a wide range of tooling for forming metal without the use of a hydraulic press. See the full description for all the details! The price Includes Free Domestic Shipping to the Continental US. Alaska, Hawaii, and international orders will require additional shipping charges. Please call for a shipping quote if you reside outside the continental US.

Overall Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.

Design Size: approximately 2" x 7" Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8". Dragonfly measures 1-3/4" x 1". Bee measures 1-3/4" x 1". Butterfly measures 2" x 1". Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8" Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill. Sample by Lynette Andreasen.

Set of matching pancake die and silhouette die Pancake die dimensions: 1-1/2" x 1-1/2" diameter (PD 831.3) Silhouette die dimensions: 15/16" x 3/4" diameter (SD 244)

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 1" x 3/4" with a 10.5mm x 8.5mm setting NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 1-3/8" x 13/16" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 15/16" x 17/32" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 20 gauge (due to supply challenges gauges may vary) Design: 3/4" x 9/16" NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Overall Design Size: approximately 2" x 6-7/8". Each Bee is 2cm wide x 15mm tall. Designed for use in a rolling mill.

Design Size: approximately 2" x 6-7/8". Designed for use in a rolling mill.