This die must be used in a hydraulic press. Design: 13/16" x 13/16" (21mm x 21mm). Overall die measures 3-3/8" x 5-3/16".

Design: 1.82" x 1.12” Matches PD 1466A Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Matches impression die FB-V278.

38 x 39mm.

24 x 25.4mm.

This option is for LAYAWAY Payment for the NEW Rincon Press. Manual: $995 Electric: $3,045 This is our newest, most compact, and most economical 20-ton jewelry hydraulic press. This press will work with pancake dies, impression dies, silhouette dies, and even our bracelet-forming frame.

These stampings are direct from Janvier in France. Sold in sets of 2. Limited Quantity! 71 x 38mm. approx. 1.5mm thick.

This shape, a smaller version of a bracelet pancake die we offer, is the perfect size for an average-size barrette or as a focal piece in a chain or leather bracelet. Great for making a matched set. 3-3/4" x 13/16"

37.8 x 8.8mm.

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 3-1/4' x 3/8" NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

28 x 19mm.

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 7/8" x 1/2" NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Please read the description before purchasing. Named after one of the mountain ranges that surround Potter USA, the Rincon Press is our newest, most compact, and most economical 20-ton jewelry hydraulic press. This press will work with pancake dies, impression dies, silhouette dies, and even our bracelet-forming frame.

These designs come from different collections. Get all three for the price of one. Left: 1/2" x 1/2" Top: 1/4" diameter with a 2mm setting Bottom: 7/32" x 7/32"

This pin depicts the beginning of a car race, featuring to race-cars and a man waving a checkered flag. Design: 13/16" X 11/16"

21 x 20mm, including ring. Please see below for info about the background texture. NOTE: Previously sold as SKU N389

21 x 20mm, including ring. Please see below for info about the background texture.

21 x 20mm, including ring. Please see below for info about the background texture.

21 x 20mm, including ring. Please see below for info about the background texture.

21 x 20mm, including ring. Please see below for info about the background texture.

21 x 20mm, including ring. Please see below for info about the background texture.

21 x 20mm, including ring. Please see below for info about the background texture.

21 x 20mm, including ring. Please see below for info about the background texture.

21 x 20mm, including ring. Please see below for info about the background texture.

21 x 20mm, including ring. Please see below for info about the background texture.

21 x 20mm, including ring. Please see below for info about the background texture.

21 x 20mm, including ring. Please see below for info about the background texture.

This die is best pressed solid using thick metal and no urethane. 8.7 x 18.3mm. 4qty: 5.4 x 2.5mm. 1qty: 6 x 2.8mm.

Design: 13/16" x 3/8" (20mm x 10mm) Die Set Includes: Die Top, with precision-welded cutter Die Bottom, with precision-registered center hole and metal guide marks on bottom- and right-side edges to assist in lining up metal in the die Urethane: Specific to each die set; not interchangeable with other designs. Color may vary. The components of each Die set are not interchangeable with other die sets, but all can be used with a single, standard Die Shoe. MUST BE USED WITH THE FSS DIE SHOE (available separately) Watch Kevin demonstrate how to use this die: https://youtu.be/7Gl-ShVKtlk

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 1-1/8' diameter NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 1-3/8" x 1/2" NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

Approx. 16 gauge (Due to supply challenges, gauge may vary.) Design: 1/2 x 1 NOTE: Each stamping is made in house, one at a time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

An assortment of 10 small pieces of aluminum (sizes vary) that can be used to create a force when pressing impression dies. Sizes will vary from 1/2" - 1". Forces work best when the aluminum is pressed hot. ALWAYS CENTER YOUR WORK. Watch the following videos to see Kevin demonstrating how these work: https://www.facebook.com/groups/1253577991351417/?multi_permalinks=7886112968097853&ref=share AND https://www.facebook.com/1640860751/videos/807686980360120/

Approx. 14 gauge (due to supply challenges gauges may vary) Design: 2-3/4 x 1/2 NOTE: Each stamping is made in-house, one-at-a-time, using vintage tools and processes. The detail in each stamping may vary, and a stamping with less detail is not considered defective.

16 gauge sterling silver 13/16" x 9/16" or 20.5mm x 14mm

Overall size: 2" x 6-7/8".