Design: 2-5/8" x 3-1/2" Die itself: 7-1/8" x 5-1/2" Coordinated to work with the Rounded Rectangle Dish Former die DF-014 ***Will not fit in the discontinued Potter USA medium press*** ***Will not fit in Rincon Press
Design: 3-1/2"from center to center of each edge Die itself: 7-3/4" x 5-1/2 Coordinated to work with BOTH the 3" Sakura Blossom Silhouette Die. SKU: SD-DF-020, and the 3" Abstracted Sakura Blossom SKU: SD-DF-019. ***Will not fit in the discontinued Potter USA medium press*** ***Will not fit in the discontinued Potter USA medium press***
Design: 3-1/2"from center to center of each edge Die itself: 7-3/4" x 5-1/2 Coordinated to work with the 3" Sakura Blossom Silhouette Die. SKU: SD-DF-021 ***Will not fit in the discontinued Potter USA medium press***
3-3/16" wide x 3-1/2". Overall die size measurements 7-3/4" x 5-3/16". Coordinated to work with DF018 Dish Former Silhouette Die Hamsa. Will not fit in the discontinued medium PotterUSA press.
Design: 3-1/2" x 3-7/16". Die itself: 7-7/8" x 5-7/16". Coordinated to work with SD-DF024. ***Will not fit in the discontinued Potter USA medium press***
Design: 3" x 3" Die itself: 7" x 5-1/4" Coordinated to work with the Pie Slice Dish former die DF-025 ***Will not fit in the discontinued Potter USA medium press***
Design: 3-1/2"from top to bottom, 2-1/2" wide Die itself: 7-15/16"" x 4-3/4" Coordinated to work with the 3" Fish Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press*** *Sample by Lynette Andreasen
Design: 3-1/2"from side to side, 2" tall Die itself: 6-1/2" x 5-1/2" Coordinated to work with the 3" Rainbow Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***
Design: 3-1/2"from side to side, 2-3/4" tall Die itself: 7-1/4" x 5-1/2" Coordinated to work with the 3" Bird Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***
This die must be used in a hydraulic press. This die is coordinated to work with the cone design on Pattern Plate RMP167 Egyptian Revival. Makes a cone with a 12mm wide end and 6mm narrow end. Shape measures 1-7/16" x11/16". Overall die measures 5-1/16" x 3-3/8".
This die must be used in a hydraulic press. This die is the same size and shape as FSS Die Set FSS-003 - Fan. Shape measures 1-1/2" x 1-3/16". Overall die measures 5-11/16" x 3-3/8".
This die must be used in a hydraulic press. Shape measures 3/4" x 1/2". Overall die measures 5-3/16" x 3-3/8". This die pairs well with PD 1641 and PD 1640.
This die must be used in a hydraulic press. Shape measures 1-1/16" x 13/16". Overall die measures 5-5/8" x 3-3/8". This die pairs well with PD 1639 and PD 1640.
This die must be used in a hydraulic press. Shape measures 1-3/4" x 3/4". Overall die measures 5-1/4" x 3-3/4". This die pairs well with PD 1639 and PD 1641.
This die must be used in a hydraulic press. Shape measures 1-1/8" x 7/8". Overall die measures 5-5/8" x 3-3/8". This die pairs well with PD 1636 and 1638.
This die must be used in a hydraulic press. Shape measures 1-1/4" x 7/8". Overall die measures 5-3/4" x 3-3/8". This die pairs well with PD 1636 and 1637.