Medium Dog tag is 2 1/8" x 1 3/16"

Pancake Die 649 Large Dog Bone with Hole Tab 1 3/4"

Pancake Die 787A Medium Cats Eye 1 5/8" x 5/8"

2 1/8" long x 1 1/16"

This die must be used in a Hydraulic Press. This die measures 1 1/2" wide x 1 1/2" tall

This die must be used in a Hydraulic Press. This die measures 3/4" wide x 3/4" tall

This die must be used in a Hydraulic Press. This die measures 1 1/4" wide x 1 3/16" tall

This die must be used in a hydraulic press. This die measures 3/4" tall x 1 2/16"" wide

5/16" x 13/16" PLEASE READ: Don't use metal thinner than 22 gauge! Metal must be full hard. There are no instructions, but there are a couple tips, below.

Guitar: 2-7/8" L x 1-1/4" W

Our redesigned pancake dies are here! Design: 1"W x 3/4" Designed by Gina Copanzzi

Design: 1-1/4"W x 1" Designed by Gina Copanzzi

Die: 3-1/16"W x 4-7/16"H Design: 11/16"W x 31/32"H

Design: 1-1/8" H x 1-3/4" W Die: 4-3/16" H x 3-1/8" W

1"W x 1/2"H (25.5mm x 13mm)

Design: 1"H x 1"W

2 1/8"H x 2 1/4"W

3 1/16"H x 2 1/2"W This large teddy bear die is perfect as a Baby's First Christmas Ornament.

This curved shield pancake die, for use in a hydraulic press, cuts metal blanks and is a versatile shape for your jewelry designs. Design: 3/4"H x 31/32"W or 19mm x 24.6mm

5/8"W x 1 7/16"H or 16mm x 36.5mm This long diamond shape is great as an earring drop

1" x 1-5/16"

This wine bottle pancake die is used to cut blanks in a hydraulic press. Design: 1 2/8" long x 3/8" wide

Design: 3-1/2"from center to center of each edge Die itself: 7-7/8" x 5-1/2 Coordinated to work with the 3" Rounded Square Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press*** ***Will not fit in Rincon Press***

Design: 3-1/2" diameter. Coordinated to work with the 3" Scalloped Circle Dish Former Silhouette Die ***Will not fit in the discontinued Potter USA medium press***

This die can be used to make a small box that is 2" x 2" x 1" tall. Designed to be used with 20 GAUGE SHEET METAL. Cutting area is 4" across each direction at the largest points. The smaller sides are 1" The outer area of the die is 7" wide x 8 1/2" high. ***Will not fit in the discontinued Potter USA medium press***

This die can be used to make a lid for the 2" box (made with Pancake Die 1518). Designed to be used with 20 GAUGE SHEET METAL. Cutting area is 3" across each direction at the largest points. The smaller sides are 1/2"" The outer area of the die is 5 1/4" wide x 7 3/4" high. ***Will not fit in the discontinued Potter USA medium press***

1523-B Pentagonal Box Base: 1 1/16" Base x 3/4" Tall Walls . Designed to be used with 20 GAUGE SHEET METAL. Overall Pancake Die Dimensions: 7-7/16" x 5-3/16" ***Will not fit in the discontinued Potter USA medium press*** 1523-T Pentagonal Box Top: 1 1/8" Base x 1/4" Tall Walls Overall Pancake Die Dimensions 6-5/8" x 4-5/16"

1524-B Octagonal Box Base: 1 1/2" Base x 3/4" Tall Walls . Designed to be used with 20 GAUGE SHEET METAL. Overall Pancake Die Dimensions: 7-7/16" x 4-15/16" 1524-T Octagonal Box Top: 1 9/16" Base x 1/4" Tall Walls Overall Pancake Die Dimensions: 7-3/16" x 4-3/4" *Makes finished box bottom that is 1 1/2" across and 3/4" tall and the top is 1 1/2" across and 1/4" deep

1525-B Hexagonal Box Base: 1 1/2" Base x 3/4" Tall Walls . Designed to be used with 20 GAUGE SHEET METAL. Overall Pancake Die Dimensions: 6-1/2" x 4-1/16" 1525-T Hexagonal Box Top: 1 9/16" Base x 1/4" Tall Walls Overall Pancake Die Dimensions: 6-5/16" x 4" *Makes finished box bottom that is 1 1/2" across and 3/4" deep and a box top that is 1 1/2" across and 1/4" deep

Design: 3-1/2" x 2-1/2" Die itself: 8" x 4-1/2" Coordinated to work with the Coffin Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2" x 3-3/4" Die itself: 7-15/16" x 5-11/16" Coordinated to work with SD-DF-011, the 3" x 3" Christmas Tree Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***

Design: 3" x 1/2" Die itself: 5-5/16" x 4-15/16"

Design: 3-3/4" x 2-3/4" Die itself: 7" x 5-1/2" Coordinated to work with the Oval Dish former die DF-006 ***Will not fit in Rincon Press

Design: 2-5/8" x 3-1/2" Die itself: 7-1/8" x 5-1/2" Coordinated to work with the Rounded Rectangle Dish Former die DF-014 ***Will not fit in the discontinued Potter USA medium press*** ***Will not fit in Rincon Press

Design: 3-1/2"from center to center of each edge Die itself: 7-3/4" x 5-1/2 Coordinated to work with BOTH the 3" Sakura Blossom Silhouette Die. SKU: SD-DF-020, and the 3" Abstracted Sakura Blossom SKU: SD-DF-019. ***Will not fit in the discontinued Potter USA medium press*** ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2"from center to center of each edge Die itself: 7-3/4" x 5-1/2 Coordinated to work with the 3" Sakura Blossom Silhouette Die. SKU: SD-DF-021 ***Will not fit in the discontinued Potter USA medium press***