This curved shield pancake die, for use in a hydraulic press, cuts metal blanks and is a versatile shape for your jewelry designs. Design: 3/4"H x 31/32"W or 19mm x 24.6mm

5/8"W x 1 7/16"H or 16mm x 36.5mm This long diamond shape is great as an earring drop

15/16"H x 1 9/16"W

7/8"H x 1 11/16"W

This pancake die design will make a great pendant. Design: 2" wide x 1 11/16" height

1 11/16"W x 1 1/2"H

1 7/8"W x 1 11/16"H

1" x 1-5/16"

1-1/4" x 3/4"

1" x 3/8"

1-1/8" x 1-15/16"

Asymmetrical drop pancake designs for use in a hydraulic press. Design: 2" x 22/32" each

This bail pancake die matches Bail from the July Mystery Box. Design: 1" x 1 20/32"

This elongated diamond pendant is perfect for making a sleek, modern necklace, but can also be enhanced with stones or other accents. Design: 2 x 1/2" Earrings by Brianna Sheppard

1" x 7/8"

1" x 3/4"

1-1/2" X 1/2" each

Design: 1-3/4" H x 1-3/4" W Round ends: 5/16" D ID: approx. 1-3/16" D

1-1/4" Wide

1-3/16" x 7/16"

1" x 1/2"

1-1/8" x 1-1/2"

1-1/2" x 1"; 7/16" between upper points

Pancake die dimensions: 1-1/16" x 1-3/4" (27 x 44mm)

Design: 3-1/2"from point to center of opposite edge, 3-3/8" from point to point Die itself: 7-7/8" x 5-3/8 Coordinated to work with the 3" Trillion Shape Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2"from center to center of each edge Die itself: 7-7/8" x 5-1/2 Coordinated to work with the 3" Rounded Square Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press*** ***Will not fit in Rincon Press***

1522-B Triangle Box Base: 1 1/2" Base x 3/4" Tall Walls 1522-T Triangle Box Top: 1 9/16" Base x 1/4" Tall Walls * Makes finished box bottom that is 1 1/2" across and 3/4" tall and the lid is 1 1/2" across and 1/4" deep Designed to be used with 20 GAUGE SHEET METAL.

1523-B Pentagonal Box Base: 1 1/16" Base x 3/4" Tall Walls . Designed to be used with 20 GAUGE SHEET METAL. Overall Pancake Die Dimensions: 7-7/16" x 5-3/16" ***Will not fit in the discontinued Potter USA medium press*** 1523-T Pentagonal Box Top: 1 1/8" Base x 1/4" Tall Walls Overall Pancake Die Dimensions 6-5/8" x 4-5/16"

1524-B Octagonal Box Base: 1 1/2" Base x 3/4" Tall Walls . Designed to be used with 20 GAUGE SHEET METAL. Overall Pancake Die Dimensions: 7-7/16" x 4-15/16" 1524-T Octagonal Box Top: 1 9/16" Base x 1/4" Tall Walls Overall Pancake Die Dimensions: 7-3/16" x 4-3/4" *Makes finished box bottom that is 1 1/2" across and 3/4" tall and the top is 1 1/2" across and 1/4" deep

Design: 3-1/2" x 2-1/2" Die itself: 8" x 4-1/2" Coordinated to work with the Coffin Dish Former Silhouette Die. ***Will not fit in the discontinued Potter USA medium press***

Design: 3" x 3" Die itself: 7-1/2" x 5" ***Will not fit in the discontinued Potter USA medium press***

Design: 3" x 3" Die itself: 7-1/2" x 5" ***Will not fit in the discontinued Potter USA medium press***

Design: 3-1/2" x 2-1/2" Die itself: 7" x 5-1/2" Coordinated to work with the Oval Dish former die DF-006 ***Will not fit in Rincon Press

Design: 3-3/4" x 2-3/4" Die itself: 7" x 5-1/2" Coordinated to work with the Oval Dish former die DF-006 ***Will not fit in Rincon Press

Design: 2-5/8" x 3-1/2" Die itself: 7-1/8" x 5-1/2" Coordinated to work with the Rounded Rectangle Dish Former die DF-014 ***Will not fit in the discontinued Potter USA medium press*** ***Will not fit in Rincon Press