1lb bags of copper scrap from Cranston Fancy Wire. Random assortment of sizes, patterns, and pieces. May include some miss-rolls from patterned wire. No returns, re refunds, no exchanges.

Randomized sets of 10 pieces patterned copper wire. Items depicted will not be consistent in each set. No refunds.

This Native American bust, designed by Ron Landis, is detailed and hyper realistic. Design: 1 3/16" x 1" The inner circle is 1 1/2" in diameter.

Small Claddagh charm, 1/2" x 7/16" or 13mm x 11mm Set of 2 in 16 gauge copper

Claddagh Oval Pendant Stamping 1-1/16" x 15/16" or 27mm x 24mm Set of 2 in 16 gauge copper

Claddagh necklace charm, 1-1/4" x 7/16" or 32mm x 11mm Set of 2 in 16 gauge copper

Four Leaf CLover Link, 5/8" x 3/4" Set of 2 in 16 gauge copper

1" x 1" with 6 mm diameter settting each

Here's you chance to get a few pancake dies at a great rate! Original retail value is $80+ ** NO PICKING, NO EXCHANGES, NO RETURNS- SOLD AS IS. Grab bag. * SOME DIES MIGHT HAVE SOME RUST. THIS IS 100% SUPERFICIAL, TO CLEAN THEM JUST BUFF IT OFF. IT WILL NOT AFFECT THE PERFORMANCE OF THE DIE

20 gauge copper sheet with 25 pre-cut triangles. Each triangle is 1" x 1". triangles are cut leaving two 1mm tabs. Each triangle easily twists out of the sheet. Each sheet may come with some surface discoloration on the copper. Cutouts will have a slight raised bur on the reverse side.

20 gauge copper sheet with 25 pre-cut ovals. Each oval is 1" x 0.5". Ovals are cut leaving two 1mm tabs. Each oval easily twists out of the sheet. Each sheet may come with some surface discoloration on the copper. Cutouts will have a slight raised bur on the reverse side.

20 gauge copper sheet with 25 pre-cut heart shapes. Each shape is is 1" wide and 1/2" tall. Shapes are cut leaving two 1mm tabs. Each shape easily twists out of the sheet. Each sheet may come with some surface scratches and discoloration on the copper. Cutouts will have a slight raised bur on the reverse side.

Learn how to make these Riveted Shield Earrings with a tube-lined hole and ear wire that stays put! In this kit, you will receive a versatile, shield pancake die, an intricate linen-texture pattern plate, and instructions on how to make the earrings shown in the listing! BONUS bracelet instructions included! Pancake Die: 7/8" x 9/16" (22 x 14mm). Pattern Plate: 2" x 7-7/8", approx. 1/8" thick.

This is a set of 6 vintage steel Christmas ornaments. These ornaments are from the 1950's and were made in Providence, Rhode Island. All 6 ornaments are made of steel, 2 are brass plated. Because these are vintage, the ornaments may have some imperfections including surface scratches, small amounts of rust or tarnish, etc. These are NOT FOR USE with pancake dies or impression dies as they are made from steel. All ornaments range from 3-14" to 3-3/4" tall. ***We will do our best to ship these out as soon as possible but cannot guarantee delivery before Christmas 2021.

1/2" (13mm) diameter.

10mm x 10mm (~3/8" x 3/8"). ~4mm deep.

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 2-1/2" diameter. 1/4" thick. Must be used with a large sheet of urethane (available separately). Pairs well with PD661A

For use only with Dish Former Silhouette Dies. ~4.75" x 4.75" 60-70durometer. May be red or black. 1/4" thick.

Lucky Dog Club is now available any time! Previously, it was offered quarterly. Now, you can sign up whenever you’d like! Becoming a member of the Lucky Dog Club gives you free domestic shipping on all orders* for one year. All orders placed by members, whether you spend $5 or $1000+, ship free. This option is perfect for those who love our Dies of the Day and prefer to make multiple small purchases!

7/16" (11.25mm) diameter

Design: 3-1/2"from point to center of opposite edge, 3-3/8" from point to point Die itself: 7-7/8" x 5-3/8 Coordinated to work with the 3" Trillion Shape Dish Former Silhouette Die

Design: 1-7/8" x 15/16" From Silveri

Design: 7/8" x 5/8" From Foster & Bailey

Design: 2-1/2" x 7/16" with 3mm settings

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" from point to center of opposite edge. ~2-15/16" from point to point. 1/4" thick. Must be used with a large sheet of urethane (available separately).

Design: 1-1/8" x 1/2" From Silveri

Design: 3/4" x 9/16" w/ 10 mm x 6 mm setting From Silveri

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 3" x 3" Square with Slightly Rounded Edges 1/4" thick. Must be used with a large sheet of urethane (available separately).

Design: 3-1/2"from center to center of each edge Die itself: 7-7/8" x 5-1/2 Coordinated to work with the 3" Rounded Square Dish Former Silhouette Die

Design: 3" x 2-1/16" Die itself: 6-13/16" x 5" Coordinated to work with SD-DF-002, the 1.5x2.5in Oval Dish Former Silhouette Die

7/8" diameter

Top: 1/4" x 1/4" Bottom Left: 1/2" x 1/2" with a 4 mm diameter setting Bottom Right: 1/2" x 1/2"

Design: 13/16" x 9/16"

Project Plate #2: Shield and 1/2" Circle. Each domed shield shape is 1" tall x ~1-3/8" wide. Each circle is 1/2" diameter. Pancake Die PD1497: Shield 1" tall x ~13/8" wide. Matches Project Plate #2. Matching circle pancake die and complementary impression die available separately.

Project Plate #1: Domed Window and 1/2" Circle. Each domed window shape is 1" tall x ~3/4" wide. Each circle is 1/2" diameter. Pancake Die PD1496: Domed Window 1" tall x ~3/4" wide. Matches Project Plate #1. Matching circle pancake die and complementary impression die available separately.

Brand new! Use this tool to make shallow domed forms, such as trinket dishes, lockets, small containers, etc. 1-1/2" x 2-1/2" Oval 1/4" thick. Must be used with a large sheet of urethane (available separately).