Potter USA - Fine Tools. Abstract

Pancake Die XM Nov 317D 3" Scalloped Square

PD XM Nov317D

$55.00

Design: 3" x 3" Die itself: 7-1/2" x 5" ***Will not fit in the discontinued Potter USA medium press***

Pancake Die XM 621A 3" Wide Quatrefoil Flower

PD XM 621A

$55.00

Design: 3" x 3" Die itself: 7-1/2" x 5" ***Will not fit in the discontinued Potter USA medium press***

Pancake Die 1544 Moroccan Geometric Square

PD 1544

$33.25

Design: 2-3/8" wide from edge to edge. Overall die size is 7-1/4" x 5". ***Will not fit in the discontinued medium PotterUSA press***

Pancake Die 1543 Moroccan Geometric Square

PD 1543

$27.50

Design: 2" wide from edge to edge. Overall die size is 6-13/16" x 4-7/16".

Pancake Die 1542 Moroccan Geometric Square

PD 1542

$27.50

Design: 1-9/16" wide from edge to edge. Overall die size is 6-5/16" x 4".

Pancake Die 1541 Moroccan Geometric Square

PD 1541

$27.50

Design: 1-3/16" wide from edge to edge. Overall die size is 5-13/16" x 3-3/8".

Pancake Die 1540 Moroccan Geometric Square

PD 1540

$27.50

Design: 3/4" wide from edge to edge. Overall die size is 5-5/16" x 3-3/8".

Pancake Die P507 Progressive Vining Leaves

PD P507

$44.25

This progressive pancake die can be used to make a patterned strip as long as you'd like. Perfect for bracelets or rings. 1/2" Wide

Pancake Die 1613 Feather Earring Pair

PD 1613

$33.25

This die must be used in a hydraulic press. Each feather shape measures 2-1/16" x 11/16" wide. The entire cutout measures 3-3/4" x 1-1/2". Overall die measurements are 5-11/16" x 5-11/16". This die will NOT FIT in the discontinued medium press.

Pancake Die 1603 - Long Drop

PD 1603

$27.50

This die must be used in a hydraulic press. The shape measures 1-7/8" x 5/8". Overall die measurements are 5" x 3-7/8".

Pancake Die 1605 - Asymmetric Leaf

PD 1605

$27.50

This die must be used in a hydraulic press. The shape measures 1-1-8" x 3/4". Overall die measurements are 5-3/8" x 3-7/16".

Pancake Die 1602 - Split Leaf

PD 1602

$27.50

This die must be used in a hydraulic press. The shape measures 1-5/8" x 1". Overall die measurements are 5-9/16" x 3-9/16".

Pancake Die 1601 - Asymmetric Split Leaf

PD 1601

$27.50

This die must be used in a hydraulic press. The shape measures 1-5/8" x 1". Overall die measurements are 5-3/8" x 3-9/16".

Pancake Die 1607 Wide Shield

PD 1607

$27.50

This die must be used in a hydraulic press. This die is coordinated to work with PD 1606. The shape measures 1" x 1". Overall die measures 5.4" x 3.4".

Pancake Die 1606 Half Oval

PD 1606

$27.50

This die must be used in a hydraulic press. This die is coordinated to work with PD 1607. The shape measures 7/8" x 3/4". Overall die measures 5.1" x 3.4".

Pancake Die 1608 Rounded Cone

PD 1608

$27.50

This die must be used in a hydraulic press. This die is coordinated to work with PD 1609. Shape measures 1.5" x 7/8". Overall die meaures 5-1/4" x 3-1/2".

Pancake Die 1609 Crescent

PD 1609

$27.50

This die must be used in a hydraulic press. This die is coordinated to work with PD 1608. Shape measures 1" x 3/4". Overall die measures 5" x 3-3/8".

Pancake Die 1610 - Leaf Trio Top

PD 1610

$27.50

This die must be used in a hydraulic press. This die is coordinated to work with PD 1611 and PD 1612. Shape measures 1" x 1/4". Overall die measures 5-1/8" x 3-3/8".

Pancake Die 1611 - Leaf Trio Middle

PD 1611

$27.50

This die must be used in a hydraulic press. This die is coordinated to work with PD 1610 and PD 1612. Shape measures 1-1/4" x 3/8". Overall die measures 5-3/16" x 3-3/8".

Pancake Die 1612 - Leaf Trio Bottom

PD 1612

$27.50

This die must be used in a hydraulic press. This die is coordinated to work with PD 1610 and PD 1611. Shape measures 1-3/8" x15/16". Overall die measures 5-5/16" x 3-3/8".

Pancake Die 1596 - Marker

PD 1596

$27.50

This die must be used in a Hydraulic Press. The design measures 2.5" long x 5/8" wide. Overall die measures 5" x 4.5"

Pancake Die 1624 - Cone Pattern 12mm

PD 1624

$27.50

This die must be used in a hydraulic press. This die is coordinated to work with the cone design on Pattern Plate RMP167 Egyptian Revival. Makes a cone with a 12mm wide end and 6mm narrow end. Shape measures 1-7/16" x11/16". Overall die measures 5-1/16" x 3-3/8".

Pancake Die 1529 - Fan

PD 1529

$27.50

This die must be used in a hydraulic press. This die is the same size and shape as FSS Die Set FSS-003 - Fan. Shape measures 1-1/2" x 1-3/16". Overall die measures 5-11/16" x 3-3/8".

Pancake Die 1639 Small Irregular Oval

PD 1639

$27.50

This die must be used in a hydraulic press. Shape measures 3/4" x 1/2". Overall die measures 5-3/16" x 3-3/8". This die pairs well with PD 1641 and PD 1640.

Pancake Die 1641 Medium Irregular Oval

PD 1641

$27.50

This die must be used in a hydraulic press. Shape measures 1-1/16" x 13/16". Overall die measures 5-5/8" x 3-3/8". This die pairs well with PD 1639 and PD 1640.

Pancake Die 1640 Long Large Irregular Oval - copy

PD 1640

$27.50

This die must be used in a hydraulic press. Shape measures 1-3/4" x 3/4". Overall die measures 5-1/4" x 3-3/4". This die pairs well with PD 1639 and PD 1641.

Pancake Die 1646 Irregular Trapezoid

PD 1646

$27.50

This die must be used in a hydraulic press. Shape measures 1-1/2" x 3/4". Overall die measures 5-1/4" x 3-1/2". This die pairs well with PD 1647.

Pancake Die 1647 Tiny Irregular Trapezoid

PD 1647

$27.50

This die must be used in a hydraulic press. Shape measures 1/2" x 7/16". Overall die measures 4-7/8" x 3-3/8". This die pairs well with PD 1646.

Pancake Die 1636 Small Wide Irregular Oval

PD 1636

$27.50

This die must be used in a hydraulic press. Shape measures 1" x 1/2". Overall die measures 5-1/2" x 3-3/8". This die pairs well with PD 1637 and 1638.

Pancake Die 1637 Medium Wide Irregular Oval

PD 1637

$27.50

This die must be used in a hydraulic press. Shape measures 1-1/8" x 7/8". Overall die measures 5-5/8" x 3-3/8". This die pairs well with PD 1636 and 1638.

Pancake Die 1638 Large Wide Irregular Oval

PD 1638

$27.50

This die must be used in a hydraulic press. Shape measures 1-1/4" x 7/8". Overall die measures 5-3/4" x 3-3/8". This die pairs well with PD 1636 and 1637.

Pancake Die 1648 Papel Picado

PD 1648

$27.50

This die must be used in a hydraulic press. This die is coordinated to work with RMP274. Design: 28.5 x 21.8mm. Overall die measures 3 3/8" x 5 1/2".

Pancake Die 1650 Papel Picado

PD 1650

$27.50

This die must be used in a hydraulic press. This die is coordinated to work with RMP274. Design: 24.5 x 27mm. Overall die measures 3 3/8" x 5 9/16".

Pancake Die 1654 Papel Picado

PD 1654

$27.50

This die must be used in a hydraulic press. This die is coordinated to work with RMP274. Design: 21 x 28.5mm. Overall die measures 3 3/8" x 5 5/8".

Pancake Die 1655 Papel Picado

PD 1655

$27.50

This die must be used in a hydraulic press. This die is coordinated to work with RMP274. Design: 28 x 30mm. Overall die measures 3 3/8" x 5 5/8".

Pancake Die PD1634 Victorian Earring Set 1 Top

PD 1634

$27.50

Approx. 8.5 x 8.5mm. Matches EG-E833-AB. Cut metal with pancake die first, then press in EG-E833-AB. Can also be used by itself as a decorative element.