New products

Specials

No special products at this time.
  • Silver Stampings from antique dies
  • Sand Casting Kit
  • Hydraulic Press

    Press is made of 1/2" thick steel plate. It has been professionally welded and has been tested to far exceed the 20 ton rating. The frame is powder-coated. This is a very durable finish

  • Pancake Dies

    Pancake dies are a great way to produce shapes without cutting with a jeweler's saw or tin snips. You can produce various shapes quickly and easily. Silhouette dies produce puffed shape.

  • Koil Kutter

    Kit includes: Aluminum koil holder lock, 6" long/ Steel top plate for holder/ Saw blade guard for DREMEL Tool (all sizes) with adapter bushing/ 1 saw arbor to fit 3/8" hole blades/ 1 saw blade.   Winder & Mandrels sold separately.

  • Potter Press Stand

    Heavy Duty Deluxe Press Stand holds the standard, Potter USA 20 ton press.

  • We ship worldwide.

    We ship your package wherever you are in the world.

  • Potter Hydraulic press
    Any Potter USA hydraulic press type is available for layaway.
  • $50.00 In Stock
    New

    First box will be shipped out Septemeber 1st!! This is our first run of our Holdiay boxes!  Each month, our boxes will include 3-5 exclusive items such as pancake dies, impression dies, shot plates, stampings, etc.. all themed for halloween

    $50.00
    In Stock
  • $50.00 In Stock
    New

    First box will be shipped out September 1st! This is our first run of our monthly boxes! Until we get our website set up for subscriptions, we will be putting up our first month on our site in limited quantities!!  Each month, our boxes will include 3-5 exclusive items such as pancake dies, impression dies, shot plates, stampings, etc..

    $50.00
    In Stock
  • $40.00 In Stock
    New

    Set of 4 Shot Plates for $40 ** NO PICKING, NO EXCHANGES, NO RETURNS- SOLD AS IS * SOME DIES MIGHT HAVE SOME RUST. THIS IS 100% SUPERFICIAL, TO CLEAN THEM JUST BUFF IT OFF. IT WILL NOT EFFECT THE PREFORMANCE OF THE DIE

    $40.00
    In Stock
  • $25.00 Out of stock
    New

    2 inch diameter x 1 inch thick urethane, 60 durometer. Can be used with or without a container. If over-squeezed without a container, it will crack. COLOR WILL VARY. 

    $25.00
    Add to cart More
    Out of stock
  • $25.00 Out of stock
    New

    2 inch diameter x 1 inch thick urethane, 75 durometer. Can be used with or without a container. If over-squeezed without a container, it will crack. COLOR WILL VARY. 

    $25.00
    Add to cart More
    Out of stock
  • $2,950.00 In Stock

     This system consists of a 20 ton electric hydraulic pump and cylinder. This allows for faster cycling. No more hand pumping the jack! Great for those who are looking to increase their productivity or are just tired of pumping a jack.

    $2,950.00
    In Stock
  • $100.00 In Stock

    Layaway for our presses - 20 ton, 20 ton medium press or the 50 ton. We are not able to hold a particular color for you. Use this option to make a $100 payment. To make several payments at once, adjust the number of this item in your shopping cart. If you need to make a payment in a different amount, please email us and and we can send you a Paypal...

    $100.00
    In Stock
  • $58.00 Out of stock

    8 inches in diameter, about 3 pounds, made with heavyweight English Bridle leather from Pennsylvania, double-stitched, filled with clean, fine-grain sand. Comes very firm, needs to be broken in. These are definitely the nicest forming bags available.

    $58.00
    Add to cart More
    Out of stock
  • $65.00 In Stock

    This large, 8 inch x 8 inch x 1 inch aluminum spacer SET works well for large items that need to be used in the press. The regular platen is 6 inches, and this is 8, allowing for more room. Please note that this product cannot be used with the Medium or Mini Press, as they are too large for either press.

    $65.00
    In Stock
  • $150.00 In Stock

    Mini forge for small work. Use with a propane and oxygen torch or with small propane tank with torch. 4.5 inches long, 3.5 inches wide, 1 inch wide forge opening. Includes stand to hold torch. Made of steel tubing with high heat paint, stainless steel stand w/firebrick interior.  Front opening, 1 inch, with 1/2 inch diameter hole in back for torch. Made...

    $150.00
    In Stock
  • $32.50 In Stock

    The Petite Necklace and Earring Display. 13 1/4" tall and 8" wide.

    $32.50
    In Stock
  • $10.00 In Stock

    Pancake Die Opener

    $10.00
    In Stock
  • $26.00 In Stock

    ***THIS DIE IS TOO LARGE FOR THE MINI PRESS*** Cuts Standard credit card size 3 3/8" long  x 2 1/8" high Actual die is 7 inches tall x 5 inches wide

    $26.00
    In Stock
  • $20.50 In Stock

    FOREDOM SHAFT STANDARD INNER CABLE FOR FLEXIBLE SHAFT MOTORS

    $20.50
    In Stock
  • $85.00 In Stock

    Sand Casting Kit includes: 1 steel flask, 5 pounds of casting sand, 1 crucible w/holder, 2 plates and 1 clamp.

    $85.00
    In Stock
  • $400.00 In Stock

    Hold all your hammers in a Potter USA Hammer Stand. Hammers not included.

    $400.00
    In Stock
  • $7.00 In Stock

    Lead Pusher Rod is used in top of our large, 20 ton hydraulic press to push lead and metal into impression dies to get a crisp, deep image. 1 1/2 inches in diameter and 1 1/2 inches long. Our medium press does not have a hole for this pusher.

    $7.00
    In Stock
  • $11.50 Out of stock

    U.S. made blades, not import.   3/8" hole, 1 1/4" diameter, 120 teeth

    $11.50
    Add to cart More
    Out of stock
  • $96.00 In Stock

    Includes:Aluminum koil holder block, 6" longSteel top plate for holderSaw blade guard for DREMEL Tool with adapter bushing (NOTE: Does not fit battery-powered, cordless or very old Dremels). We use a Dremel 200 here in our shop. 1 saw arbor to fit 3/8" hole blades1 saw blade 1  2oz Coil Lubricant ....ALWAYS LUBRICATE YOUR COIL!!  

    $96.00
    In Stock
  • $35.00 In Stock

    This is for use with the 20 ton medium press. These extended platens are used with our bracelet dies to cut the metal since the platen is not as long as our dies. Comes as a set of 2. Made of aluminum - much easier to move around! Platens are 1 inch thick, 3 inches wide and 7 inches long. Place one above and one below the bracelet die, perpedicular to the...

    $35.00
    In Stock
  • $21.50 In Stock

    Urethane 2" x 7"  95 durometer. This urethane is used with our pattern plate dies in the press to impress the pattern on metal.

    $21.50
    In Stock
  • $100.00 In Stock

    Layaway for our presses - 20 ton, 20 ton medium press or the 50 ton. We are not able to hold a particular color for you. Use this option to make a $100 payment. To make several payments at once, adjust the number of this item in your shopping cart. If you need to make a payment in a different amount, please email us and and we can send you a Paypal...

    $100.00
    In Stock
  • $22.95 In Stock

    Make your own die, just use your jeweler's saw! See details on this in the product description.

    $22.95
    In Stock
  • $10.00 In Stock

    This is a set of 4 Lead pieces to be used with the impression dies in the Hydraulic Press. Lead squishes and de-forms, but can be squished into a ball. Many times it will take more than one sheet to give a full impression. Watch Kevin's video in full description of product.

    $10.00
    In Stock
  • $335.00 In Stock

    Bracelet Former Kit to be used with 20 Ton hydraulic press. Our Bracelet Former Frame is now magnetic - no adapter plate needed! Great to use our bracelet pancake dies to cut the metal first, then form with our Bracelet Former Kit, for quick cuff bracelets. Save $50 by buying the Bracelet Former Kit!

    $335.00
    In Stock
  • $39.00 In Stock

    Use this for winding the wire to make the jumprings. Ships in a medium US Flat rate box.

    $39.00
    In Stock
  • $25.00 In Stock
  • $60.00 In Stock

    2 x 2 contained urethane with pusher for use with our standard, 2 inch silhouette dies. Allows for deep embossing of die shape. Comes with container, 95 durometer urethane and metal pusher.

    $60.00
    In Stock
  • $8.75 Out of stock

    Plain copper sheet, 20 gauge.  5 inch x 8 inch piece CDA #110; 99.9% pure We can cut it to 6 in x 6 inches if you would like. Just note it on your order.

    $8.75
    Add to cart More
    Out of stock

Follow us on Facebook