1" x 1"
7/8" x 7/8"
7/8" x 7/8"
3/4" x 1 5/8"
1/2" x 3/8"
3/4" x 7/8"
1/2" x 1/2"
1" x 1"
1/4" x 3/8"
Bracelet Forming tools, Bracelet Bender, Bracelet Mandrel
Bracelet Former Kit to be used with 20 Ton hydraulic press. Our Bracelet Former Frame is now magnetic - no adapter plate needed! Great to use our bracelet pancake dies to cut the metal first, then form with our Bracelet Former Kit, for quick cuff bracelets.
This is for the FRAME of the bracelet former. Frame (3 1/8" from top to bottom, excluding top bolt, and is 3 3/4" including top bolt) Frame is 4 3/4" across at the widest point. The frame is magnetized so the former pieces will be held to the frame for use.
2 inch wide Large anticlastic former to be used with bracelet frame. Ships in SMALL flat rate box. Fits the frame and makes a large anticlastic bracelet. Great to use our bracelet pancake dies to cut the metal first, then form with our Bracelet Former kit, for quick cuff bracelets.
2" wide. Small Anticlastic former is the former on the bottom right of the photo. Great to use our bracelet pancake dies to cut the metal first, then form with our Bracelet Former kit, for quick cuff bracelets. Ships in SMALL flat rate box.
Double Anticlastic Bracelet Former 1.5 inches (same size as our larger bracelet formers) Each ridge is .75 inches tall (give or take a 16th of an inch) This is for a single former, not a set.
This is for narrow Synclastic Bracelets. 1 inch wide, 1 inch radius. This is for one former, not a set.
This will create a synclastic bracelet with a sharp "V" at the apex. 1 inch wide x 2.5 inch long
Watch the video Squishy/Foldforming Bracelet Tutorial, on our home page. Make your piece 6 1/2" long and 1/4" wider than the urethane you choose, so it will fit into the grooves of the aluminium! Example, if you are making one with the 2" urethane, you need to make your metal 2 1/4" wide x 6 1/2" long!.... OPTIONAL the bracelet bender and a mandrel...
Bracelet Bender Deluxe Kit (a.k.a. The Joni Bender) with 2 different size (60/61) aluminum tubes with a solid aluminum base to fit in your vise. These bracelet benders are extremely durable, you can bend up to 14 gauge metal. This bender is great to prep your metal for the Squishy/Fold Forming Bracelet!
Bracelet Mandrel 2" long and 2" in diameter designed for the Squishy/Fold Forming Kit. This Bracelet Mandrel has a domed top and the bottom is machined to fit in your vise. It's great for doming the edge of your bracelet and makes it very easy to slide your 6 1/2" soldered (squishy) bracelet over to make your piece perfectly over your 2" urethane.
This is an AMAZING Swing Arm Bender. Great for bending heavy gauge silver or stainless steel flatware.
Double Cylinder Bracelet Bending Pliers 1 1/2 x 1 3/4